Stiffer DINMount 90° DIN Clip designed for Andersen's Meanwell uhp350/500 clips - REMIX

Since these models could be used with electrical components, if you use these models, it is at your own risk.  Using a fire resistant filament is probably a good idea too.

This is a remix with a clip design that originated from Ramalama2's (@ TeamFDM) Stiffer DINMount, and is remixed here to use with Andersen's Meanwell uhp350/500 clips.  

The clips were suggested and tested by  Steiner-Se, who mounted the UPP supply across 2 DIN rails (perpendicular) on a 2.4 R2 build.  The pic below showing the DIN clips assembled to the UHP mounts is also courtesy of Steiner-Se.  

These mounts have 37mm hole spacing set at 90° from the clip, and are designed to be used with M3 heat set inserts.  The pockets for the M3 heatset inserts is 4.7mm (dia) by 4.5mm deep.

Note that they will not work for mounting a supply parallel to the DIN rail.
 
The STEP model is included.  Please be sure to include Ramalama2's (@ TeamFDM) Stiffer DINMount as a remix source if you remix this.

I have a number of other Voron related models, which you can find here.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables or MakerWorld, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!