1 / 3
Sovol SV08 drag chain system - Toolhead fixation
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of relevant parts of the official Drag chain System by @g013u_2076235
- Rating
- 4 / 5
- Likes
- 36
- Downloads
- 212
- Makes
- 1
- Views
- 1,282
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I reworked the two parts that are connected to the bowden filament tube on top of the toolhead.
- problems
- the chain is orignally “lose”, its only attached to the bowden tube and the cable
- the filament tube releases itself due to pressure on the quick release ring
- the chain is hanging more bacause its not attached to a fix spot
- solution
- I attached the cable clip that is originally screwed to the toolhead at the drag chain holder
- I added a ring as a guide for the quick release ring
You have to cut a little bit on the upper side of the toolheadcover, but its not much. Just to make the cover fit again.
BOM
M3*10 bolt x1
M3*4 insertnut x1
I printed all the parts out of ABS+ ESUN. Maybe I'm going to reprint everything in ASA-CF or ABS-CF. The prototype you can see in the picture was printed out of transparent PETG for testing.
If you like my rework, please like :)