1 / 4
VZ 58 5.56 Magazine Pouch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mag pouch for a Safariland ELS system. Print in PETG or better for outdoor use.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I recommend a .4 nozzle printed in PETG or ASA especially for outdoor use. I have not tested this with a 7.62 VZ magazine so your mileage may vary. The tightness of the grip on the magazine is meant for a M3 machine screw 10-15mm in length minimum along with a M3 brass insert heat pressed into the receptacle.
I've used this outside in the Arizona sun for several months now and I've had no issue with the print.