651 models
I adapted the great VzBot frame brace for my 3030 extrusions. Made it wider and added holes that fit M6x12 bolts. That would be the “medium” one, about 20cm long. Based on this one, I created a “short” (10cm) and a “long” version (29cm).…
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4976173 . The Tronxy X5SA is a very cheap printer with some pretty serious problems. The factory belt path is far from ideal, the motor and pully mounts are…
Vzorník barev filamentu zároveň slouží jako žeton do nákupního vozíku. Kroužek znesnadňuje dekolektivizaci. The filament color swatch also serves as a shopping cart token. The ring makes decollectivization difficult.
Hi, I have remixed the CB-C2 by kejar31 stealthburner tool head to fit the Vz-Hextrudort CNC. There are two versions below the Mellow Fly-SHT V2.0 Board or the EBB36. Everything can be printed without supports except for the Cable Door.…
Pea Shooter from Plants Vs Zombies Print instructions Head and Pot need supports, stem is small so I would suggest increasing the infill on it to 35% of greater as it hold a lot of weight. Also the stem is supposed to screw in but…
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
While waiting vzbot official printhead, I design a printed printhead modified from eva to have the same feature as vzbot alu printhead. adjustable fan height, QD2 support, CPAP Fan only, support orbiter 2, vzhextrudort, lgxlite, sherpa…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC V2 It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
Logo design is from github CAD
I modified my last Mantis TAP toolhead to now support Simon Vez's Goliath hotend. I'm using CPAP on this but it has the standard mantis fan mounts if you want to use the original Mantis 5015's, but you will need to get the correct ducts…
HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…
KIT Frame brace from Vzbot Design for printers with frame profile 2020 and 2040. STL file part B to complete your Carbon fiber brace kit.
no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…
This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…
Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…
Ich lade hier das Model einer Hager Verschlussschraube VZ225N des Ersteller nyyotam von thingiverse hoch. Beim Aufbau meines Unterverteiler sind mir diese Verriegelungsschrauben abgerissen und wenn man den Neupreis der Schrauben im…
Contributo al sistema "Retractable_Probe_Dock for Klicky Probe e Quickdraw Probe" per Voron di "Tronfu" riadattato alla VzBot. Più che contributo, e un restyle estetico al modello di Eduardo Sousa ma modificando il sistema di regolazione…
4028 Mount for VzBot F3d Racing RatRig CNC'd aluminum Print Head. 2 version, M3 nuts or M3 Heatset Inserts BOM: 6 x M3 nuts or M3 Heatset Inserts 4 x M3x35mm Bolts 2 x M3x25mm Bolts 2 x M3x10mm Bolts 1 x M3x8mm Bolt + M3 Nut/Heat Insert…
I tried to adapt the original born for the VZ-Bot 235 to the VZ-Bot 330 for those who have the stepper pin facing inward I added an Airbox with the lower left part recessed so as to adapt it directly without having to turn the engine, if…
I adapted the great VzBot frame brace for my 2020 extrusions. Made it wider and added holes that fit M5x10 bolts. That would be the “medium” one, about 20cm long. The original is available on GitHub: https://github.com/VzBoT3D/VzBoT-Vz330…
11.3.2023: Backplate fixed, small collision was there. Design is prepared for: MGN09H linear rail Rapido HF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file included. Design is prepared for V-Core…
VZ.61 guards to protect your hands. 0.2mm Layer Height 50-99% Infill 6 walls & 6 Top & Bottom Layers 50mm/s Walls speed, 100mm/s infill speed Supports 85 angle, Build Plate Adhesion: choice is yours. Handguard Hardware (1) M5x30mm bolt…
This is a conversion for the KP3S to Vzbot 180mm. This can also be built just as a 180mm Vzbot, just designed the rails to use the rails from the KP3S and the KP3S bed. I have included a STEP file for people to use. The original design…
my son wanted some PVZ characters to play with and made these from an existing file it needed some diversity Category: Toys & Games
Used for checking alignment on both sides of X gantry made for the VzBot CoreXY 3D Printer Tension belts on both sides until linear rail lines up with aligner
Moded EVA3 plate for LGX-Lite extruder to adapt VZ-HextrudORT Low extruder. Nothing special for printing or mounting, you can refer to EVA 3 carriage instructions for printing. During assembly it's necessary to unmount the extruder face…
A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5…
I have recently bought a VZ-Hextrudort-Low extruder and needed a new mount (along with a new upper Stealthburner body). Didnt find anything that I like and I was already satisfied with my SB mount so… I made a remix for that same mount.…
1 Introduction This model introduces the VzBoT-Vz330 gantry to the Flying Bear Reborn 2. It enables the usage of the Vz-Printhead without changes. Key Features 180° rotated Vz330 - 2WD setup Support of the Vz-Printhead without further…
VZBot electronics mounts on din rail: Orange Pi 3LTS BTT Octopus PRO with 5160 Only BTT Octopus PRO PSU Meanwell RD35 DINrail clip You'll need screws and nuts M3
Desing taken from Mirage's Hevort project - https://hevort.com/ 19.5.2024 - Created variant Rev. D (E) 23.5.2024 - Added variant for Rev. H BOM: - 4pcs M3x5x4 brass heat inserts - 2pcs M3x12 screw - 2pcs M3x10 screw Beacon Rev. D (E)…
Whilst this model may appear NSFW, i assure you it is a cooling duct for people running CPAP blowers. I thought people in the VZbot community might like to try it so i remixed it to make it mountable to the VZbot cpap system. I would…
additional parts for VZbot: -Probe vario mount frontside (right), if you need on left side (like in the picture), please mirrow it in your slicer -Probe vario mount backside -BL-Touch mount for vario mount short (fits to common UHF…
This 3D printable file provides a precise and efficient solution for mounting either the EBB36 or SHT36 canbus board onto the Vz Hextruder CNC, complete with a PG7
I quickly made this model based off of Hevort's Tentacool. It's not super tested yet so let me know what problems there are. It did require me to further restrict the CPAP duct to allow for the Beacon connector, but seems to work OK so…
This is for an airsoft model and will literally not work on the real thing, which has a totally different mounting system, don't waste your time. This is a quick and dirty buttstock rail adapter for the KWA/KSC VZ61 GBB/GBBR Airsoft Toy.…
This is a newly designed adapter for the VZ-HextrudORT paired with an EBB36 CANBUS board. an ercf filament sensor is integrated (if you want) a cooler for the board (if you want) It should also fit the FLY SHT36, but unfortunately I can't…
For VZBot printhead or cnc version you dot need do any changes, but for Sapphire Plus 3D printer you need make some chages. All top cover need turn 180 degree around, my was from factory all ready bend and im not using it. Motor holders…
After trying out another mount found here I noticed that the ebb36 was uncomfortably low. To point of risking a fire, the heater ports are too close to the VZ CNC Toolhead top plate. The can-board itself sticks out roughly 4mm above the…
This is a tool for the home services. This model is prepare for a heater vent repair. Size of the square inside is 5x5 mm. Printing: Is it better to print it from PETG or ABS in laying down positionto make the tool stronger. For the print…
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
Previuous version have some problem on belt position, if you already download the previous version, re download again. I already fix the belt positioning deviation. Report any issue to github/vzbot discord or here. MGN9 only. Refer to vz…
These are the VZ-Bot frame reinforcements made up of a 10 cm long 2020 profile and two parts molded in ABS. for those who struggle to make very large abs prints or for those who simply don't have a print bed that's not big enough. the…
9/4/22 - Added RatRig dock and 4mm offset variant.
@9.4.2023 : Duct for Rapido UHF added Design is prepared for original VzBot CNC printhead and following hardware MGN09H linear rail Rapido HF/UHF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file…
I ran with a Tentacool nozzle duct for a while, but noticed it was lacking in flow. I also needed a new setup due to me using a BD Sensor M, so I started working on a new simple duct system for my Artsy printer. Which also made it work on…
I am the original creator of the VZ-BOT printed printhead, Using VZ-BOT alu printhead mockup I came up with this design, until Vez see my design on discord, then he message me if he can adopt it as the official printed printhead. And now…
This is a mount for using a 40mm fan in combination with the CNC machines VZ-Bot ratrig printhead. It's specific for using the Vz-Hextrudort and Rapido hotend. It is a WIP as I am still building the printead. STEP file is included for…
loud mini 3 piece horn. easy 1.5 hour print. 32 grams.
This is a mounting solution for the Voron StealthBurner on a VzBot. I modified the EVA 3 mount and aligned the belt paths for the VzBot gantry. I made a front adapter plate to hold a Voron StealthBurner toolhead. Why, you may ask? Because…
This is an active carbon filter for the Voron v0 (tested on a v0.2), designed from scratch but inspired by the Nevermore Micro (https://github.com/nevermore3d/Nevermore_Micro) and MFNano (https://github.com/MapleLeafMakers/MFNano)…
Ztratil jsem originální klíček na odvzdušňování topení. Dělat to šroubovákem je opruz. Proto jsem udělal tento rychlý model. Moc krásy to nepobralo, ale funkční to je. Pokud jsou odvzdušňováky v pořádku a nejsou dorvaný na krev, tak plně…
cpap duct for VZBot alu printhead with Quickdraw v2 by annex
[EN] Cubes for testing the infill pattern. Dimensions (1 cube): 30 x 30 x 30 mm (length, width, height) Material: PLA Layer height: 0.25 mm Infill: dynamic for every cube (10 %) Solid top layers: 0 [CZ] Krychle pro otestování vzoru…
Modified the original LSD Duct + Beacon mount
Feedback is welcomed in the comments. I am personally running the v3 version and it is working very well so far. With the 2510 duct from Github, I was getting some occasional clogs but not anymore. I recommend printing it top down with a…
Hello, I modified the LGX Lite Mod by Eytecz to mount a Vz-HextrudORT. It's just a small recess to adjust the filament tension. The rear component is from the LGx Lite mod. Suitable for everyone who has installed a Stealthburner. Original…
I had this HMTECH brand (generic) Raspberry Pi screen 7" that uses HDMI and USB. While it has a VZBot logo and was made for my vzbot, it should work with any screen that is similar to size than the HMTECH (different brands have the same…
Bowden tube original Vz-HextruDort Clip PIN lock V1 - clip type 1 V2 - clip type 2 (pneumatic) V3 W.I.P. Print Settings Brims/Rafts ─ OPTIONAL Supports ─ Yes Wall Thickness ─ ≥1.2mm Top/Bottom Thickness ─ ≥1.2mm Infill ─ 30% Filament…
VzBoT CPAP Fan Duct and upper duct. For best visual quality, print with a layer thickness of 0.12 or less.
The original is larger than it needs to be; this saves print time, material and back panel space.
The Avrocar was an experimental VTOL prototype designed by Avro Canada in the late 1950s for eventual use by the US Military. Unable to meet most of the design goals and extremely unstable outside of the ground effect, this project was…
EBB36 Mount for Xol Toolhead with VZ-Hextrudort with added M12 holder. (Cable Gland) In the holder part there is a hole for an M3 heatinsert. Also there is a groove for a zip tie Printed with standard voron part settings in CR3D ABS Carbon.
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low . BOM Item Count Description M3 x 5 Heat Inserts 5 or 6 M3 x 6 Counter Sunk 1 Front…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
The HD12MGN9 Tentacool Beacon duct by MirageC and sillysam71 has been adapted to decrease the y-offset. It has also been lowered slightly to fit my setup, please refer to the pictures. A suggested print orientation and support layout for…
QuickDraw Servo Dock made vor my VzBot for QD2 and a MG90s Servo. Some parts needs to be printed with supports. Also uploaded a Dock without VzBot Logo and one without the big chamfer which is easier to print. Update: Made the Arm a tiny…
Uses 4x m3 Voron spec heat inserts and a couple M3 screws. Also requires the nut for a PG7 gland, went this route because threads tended to be weak when printed. V1.1 - Added a new mount for the SHT-Fly V2 to accommodate the connector…
Adjusted to fit generic aliexpress/amazon 7 inch LCD screen. 4x M3 screws which length depends on the spacers you use, 4x M3 brass inserts. 1x M6x40 bolt 1x M6 nut and 1x washer. 4x M4 screws and 4x t-slot nuts to attach the whole…
Small mod to clear top components on Rev H
Simple model of armored car OA model 30 / Pz. Spw.30 (t) in 1/35 scale. Possibility to print a whole or a few parts separately. Information https://en.wikipedia.org/wiki/OA_vz._30 The photo shows a prototype copy of the Prusa Mk3,…
Lehký kulomet vz. 26 / ZB vz. 26
Screen Mount to allow the use of a BTT HDMI 5 screen on the VZBot 235. The screen attaches in the same location. Bonus door plate included that fixes the incorrect pattern sequence for those of us with OCD. Hardware is standard M3 bolts…
bambù hotend group adapter, for hextrudort trolley, vzbot cnc
Hi I have created filament spool holder for vz235 - filament dryier for free. You can easily print 4 sets of this holder and mount 2 spool of filament inside. BOM/1 set: 3D printed parts - ABS (1 part is mirrored - so you need 1 normal 1…
VZBot - EVA 2.4 Carriage front plate Front plate for the E.V.A. 2.4 Carriage System in combination with the VZBot Y- carriage. VZBot is tighter than Ratrig and therefore the belts need to be closer to each other. This means the front…
Support for sht36v2 mounted behind the stepper motor, To ensure that the PCB can be positioned behind the stepper motor I also modified some parts of the vzbot printhead. BOM: 2x spacer 12mm 3x m3x8 1x m3x6 1x insert nut M3 x 4
UPDATE 28.04.2025 FINAL VERSION I went back to the option with a single 4*2.5 PTFE tube going through. An m2*10 screw is used to fix it. A template for cutting the tube has also been added. ***** UPDATE 26.04.2025 The channel's shape has…
This is a remix of the printed Y gantry parts of the VzBoT-Vz330 for the Flying Bear Reborn 2 VzBoT Gantry Mod . There are two different variants offered: Shaft variant 1 (SV1): To be used with M4 shoulder screw and hex nut (Mellow screw…
Uni tlumič pro větrovky. Závit 1/2 UNF 20 pravý. Pro dokončení je vhodné použít karbonovou trubku o D30/28mm. Tisk jako monoblock, podpěry jen kolem vnějšího závitu. Otestováno na Artemis PP750 5,5 a účinnost je na celkem kompaktní…
I recently tested the Bambu Hotend on my VZ235 after hearing positive reviews about its performance. Since I primarily print technical parts that require high durability, strong layer adhesion is a key factor for me. Through my testing, I…
Objekty lehkého opevnění vz. 36 C1 a C2 budované v rámci zemského vojenského velitelství Bratislava v první polovině roku 1937 v úsecích Pastovce a Šahy. Všechny tyto objekty byli zničeny. modely jsou v měřítku 1/72
Nastavitelné parametry umožnují přizpůsobení modelu. Upgrade: v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
this mk8 mount is for people who wanna mount a mk8 on a vz printhead,you might ask why?well there are volcanos mk8 and they are actually high quality and with a cht nozzle and a 50w heater you can get flow of around 35mm3/s with a better…
Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail
An alternative way of mounting a 7inch display to a VZBot (or similar large format Corexy printer). The “official” BOM calls for a 5inch BTT Pi display, but due to the pi shortage more people are using pi alternatives such as the BTT CB1…
Fell free to test it and GIVE any feedback or modification advice. I print it with 5 walls, 5 top and bottom. No need infiil like this cause it's full filled but small and low weight enough. For the adxl mount hole you can use both…
Filament sensor and ECAS collet for vz-hextrudort extruder. Filament entering the extruder gears is the switch, this does not contact the filament. Something about only working with LDO motors because of the stepper ear thickness being…
Passend zum EVA-2.3 System Hier wurde der Luftkanal entsprechend angepasst, so dass das Bauteil nun richtig gekühlt wird.
Holden VY / VZ Centre Console Flip Lid repair TAB, This will also suit some US & exported models. Printed in ABS, 50% Honeycomb Infill, 0.15mm Layer height, Print 3 or 4 at once. Brim can be used if you have adhesion issues, These have…
Finished device looks like this. Uses my ADXL nozzle mount: https://www.printables.com/model/388882-adxl345-nozzle-mount
This is the Y gantry bottom parts for the VzBoT Vz330 used to replace X gantry to lower cost, lighter weight 1515 size instead of 2020 size. The geometry and shape is based on the Vz330 V1.2's Y gantry except for minor differences and is…
As far as I can tell this is accurate enough to be useful. The gun I used it in fit the gearbox very snugly, and aligned well with the barrel. .STEP included. Also included is a model of the JG Vz.61 barrel and chamber. Hopefully I will…
Untested. Join me on the VZBOT discord.
This is a Simple Cable Drag Chain Mount for VzBoT Vz-Printhead. That is an adapter to use the stock drag chain which is from TRONXY X5SA on Vz-Printhead. BOM Part PCS M3 heat insert 2 M4 heat insert 2 M3 screw 2 M4 screw 2
![Ratrig Vz Printed Printhead [Beta][Untested]](https://media.printables.com/media/prints/379041/images/3182847_9094d9c8-64b4-4e48-818b-1a31c0cb11ba/screenshot-2023-01-24-063953.png)
![Xol Toolhead | EBB36 Umbilical Mount - VZ-Hextrudort-Low [M12 Cable Gland]](https://media.printables.com/media/prints/795812/images/6162862_5eb57d62-4ff5-44c5-95cb-b24b9b61f722_cad32f21-9500-4919-9498-b72602d5a957/whatsapp-image-2024-03-07-at-120132.jpeg)
