EBB36 CanBus Board Mount for VZBot Printhead CNC with PG7 mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 301
- Makes
- 0
- Views
- 2,552
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC
It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm
It's designed to be printed in ABS, ASA
The EBB36 board can be attached using M3x6 bolts and M3x6 to printhead
Note that the connector I have has an M12x1.25 thread
Prints flat, 20% infill grid, 0.2 layer 2mm wall size , nozzle 0.4 nozzle
Changelog:
2023-03-19: Corrected - it is now possible to connect the CAN connector plug