1 / 5
Heavy-Duty 3kg SpoolHolder for Sovol SV08
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sturdy spoolholder to mount big and heavy spools on the Sovol SV08, no additional hardware needed.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 59
- Makes
- 1
- Views
- 385
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A heavy-duty spoolholder for the Sovol SV08 which needs no additional hardware, just pop it onto the inside of the original spoolholder with one bearing attached as seen in the picture. Interlock the parts using the original Screw and mount it to the printer.
Printing this from PETG or a stronger material is recommended.
Since it has to take a lot of weight, be sure to print it sturdy enough.
Print as oriented, no supports needed.
At least 6 perimeters, more are better.
At least 15% gyroid infill.