Counting matching models…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder "…
A print-in-place crossbow that fits in your wallet. It has 3KG of draw weight allowing it to launch the arrow up to 5M. The model prints excellent in PLA and it has some power too! The arrows are in a separate kit card because you are…
I wasn't happy with any of the spool holders out there that can take the bigger spools too - so here is my version! Max spool with: 11.5cm This print uses PCS 608 Skateboard bearing, I got mine here: https://amzn.to/3r7NkKE (100 Pack) or…
SUNLU S4 extension for 3kg spools. Reuploaded from Sunlu's website for more exposure. Please see the PDF guide for more instructions.
Spool holder for 3kg spools. Utilizes two 17x35x10 bearings.
Update 2025-07-26: Added a sturdier version featuring support beams for improved rigidity. This design is inspired by reinforcement techniques I used on a spool holder that previously flexed under load. Tip: Print both support beams…
Spool holder which can hold wider and bigger spools, easy to use. You will need 4x zip-ties to attach the holder to the frame. Print instructions Spool holder without top/ bottom layers Petg/ASA/ABS 0 top/ bottom layers 3 perimeters 10%…
This 3D-printed filament holder is designed for larger filament spools weighing up to 3 kg. It features a robust and stable design, using 608 bearings for smooth and efficient spool rotation during printing. Its simple construction makes…
Creality k1. Suppot bobine de filament avec roulement à bille. (roulement type 608: 8x22x7), pour bobine d'1kg et de 3kg. Creality k1. Filament spool holder with ball bearing. (bearing type 608: 8x22x7),for filament spool 1kg and 3kg…
The original model from Jérôme Lievens works great but it was just a tad bit shy of comfortably fitting the 3kg spools that I use for some of my larger print projects. I've extended the length of this model a bit to make it better fit the…
I looked at many of the existing designs and wanted a heavy duty spool holder for an overture 3kg spool I purchased. I printed the body out of PETG and the rod out of ABS with 6 walls and 25% infill. The end of the rod is trapped to…
This is a simple Spool Holder for the Prusa MK3s Printer that will hold up to a 3kg roll of filament. Also works just fine for 1, 2, 2.5kg spools. This design aligns the spool of filament so that it minimizes the flex on the steel frame…
9/5/25 Update: All changes are in bold italics. Includes instructions for simpler way to adjust the height of the file and a warning that the base file might not be the exact right height for your machine. Unfortunately, I unintentionally…
Ensuring your filament is dry during printing can greatly improve print quality. This is especially important in humid climates and for more hydroscopic materials like Nylons and TPUs. We weren't happy with available printed dry boxes and…
Simple replacement spool holder for the Prusa Core One to allow for the use of high capacity spools up to 3kg. However, there is not a standard size for high capacity spools, so check the manufacture's website for spool dimensions and…
A simple and strong filament shelf. Made to fit 13/16" (~20.5mm) dowels. Mounting holes sized for standard drywall screws. Printing: I used 5 walls for strength and 20% infill. I printed the first set at .2mm but I liked the look (and…
I found the 3kg rolls i was using only just fit on the original roller and would sometimes dislodge mid print.
PLA+ Layer 0.2 infill 20% Wall 5 no Support Short Version: 125g ca 4h Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu
A remix of the official Polymaker Cardboard Spool Adapter which fits their 3kg cardboard spools. Step file, .STL, and CAD (Alibre) project are available in the downloads tab. I recommend printing it out of something with a higher HDT than…
I recently got a 3kg spool of eSUN PLA+ from Amazon because it was on sale. But the spool seemed to be too large and too heavy to trust the spool holders on the printer, so I decided to build one that I can put next to the printer. Needed…
This is a stacking horizontal spool holder/roller, originally designed for PolyMaker's 3kg spools (120mm wide, 250mm OD, 55mm ID). The parts are broken up with the largest being the tray at 250mm across. A printer with 250mm print area…
A model I quickly made inspired by a spool holder I saw in a photo way back. Super simple to assemble, and is a relatively quick print. I made two versions of the top rail. One of them has a 4mm groove to slot in a PTFE tube to create a…
This is a bearing based 3KG spool holder that is desk based and fixewd width for stability and function. For each unit you will also need 4 x 608 (8x22x7mm) bearings and 4 x 20mm M8 countersunk bolts. Best settings, 0.3mm layer height,…
Uses less material while maintaining structural integrity
Big Spools Be Rolling Want to run 3kg spools with the official Prusa Enclosure? This design holds 3kg (and smaller) filament spools on top of the Prusa Enclosure with rollers riding on smooth roller bearings. Along with a Reverse Bowden…
Need to mirror second mount. print 2 halves of one of the rods. also check out my wall mounted ecas filament guide: https://www.printables.com/model/1104972-wall-mount-dual-ecas-fitting-filament-guide
Description I designed this universal 1-3kg spool holder primarily for top feeding 3kg spools on the Prusa Core One and MK4 in the Prusa enclosure. That said it might be useful for many other printers and setups. Specs Spool Diameter Max:…
Based on Zack Freeman's gridfinity system. Uses M3 x 8 screws for the 3kg spool design, Uses M2 x 6 screws for 1kg spool design. and gridfinity 6x2mm magnets if you choose to use magnets. Uses a 3/4inch or 20mm rod for the middle. Or you…
***REVISED*** I had uploaded the wrong front-screw model … added proper one and also a small washer to retain the baril in place with the bearings when changing spools :) Spool support with a cylinder on needle bearings to minimize…
The best result should be printed in petg.
Original Front was to short for me so i had a 7-8mm gap, and Remake for adding adjustable rollers with 608zz ball bearings. dimension for ball bearings: - outer diameter 22mm - inner diameter 8mm - thickness 7mm
PLA+ Layer 0.2 infill 20% Wall 5 no Support Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu
This is a lengthened spool holder for 3030 extrusions. Should be compatible with the kit that comes with your Ratrig with the only exception being the longer PTFE tubes you will need. Print on its right side.
Print with p1s strength profile
Here is a pair of 3d printed uprights to hold more 1kg spools OR a 3kg spool. It is designed to use a 1 1/8" or 28mm wooden dowel. Two uprights are required, just download the single model and mirror it for the second. Thank you to those…
The original spool holder for the SV08 max is sized for a 1kg spool. That is dumb as this monster needs ample filament for long prints. This extension adds 50mm to the spool holder to accommodate 2kg and 3kg spools. This does seem to be…
Print area of at least 290x290 mm needed! Print settings: Optional layer height but 0.2 works fine. 4-5 perimeters, 10-20% infill, at least 0.6mm top and bottom. Print one pipe, two sides and two fronts. Assemble and print some more. You…
Here you will find a solid filament holder for 1KG and 3KG rolls. You can choose between a TPU shaft or a solid shaft made of PLA or other materials, for example. The holder is designed to last a long time and fits all common filaments.…
Wanted to mount a 3KG spool. There are a few angled holders similar to the stock design out there, but with all that weight, I wanted the spool to be directly above the frame. Used a pair of 608z (8mmID x 22mmOD x 7mmW), bearings I had…
I have remade the Sunlu S4 3KG spool cover that works much better for 3D printing that greatly improves the printability and also allows for better use of infill and thus uses much less filament and quicker print times.
Simple spool holder to fit bigger 3kg spools, basically the stock spool holder extended. It will bend a little bit when a full 3kg spool is on it, this is normal. You can also fit 2 1kg spools on it. I have used this for ~2 years, there…
If you like what i do, please consider throwing a few breadcrumbs my way :) https://ko-fi.com/duckers
If you want to download .STEP files vistit my Pateron I couldn't find an elegant 3kg dry box spool storage, so I decided to make my own, inspired by a smaller dry box already existing. If this model helped you, don't forget to post your…
This fits Polymaker 1kg, 3kg spools. Have not tried on 5kg spool yet. Print Panels 20% infill 5 perimeters Print "Left/Right 15% infill 5 perimeters Qty 12 #8 x 1 inch panhead woodscrews thread to assemble. Had to file tab holes for snug…
Design Concept The 5kg Filament Spool Roller is designed to facilitate smooth unspooling of filament during 3D printing. Its simple yet effective design aims to minimize tangling and maximize efficiency. Use This roller is ideal for…
Was having issues using my RepRack above my printers with 3kg Spools so I made my own solution! This works amazing and lets me print right from a rack mounted spool holder above the printers. Optionally add non-skid feet for a standalone…
Ready to print with .2 mm layer height (need to add support for the drums on the bottom side). Also needs 4 PCS 608 Skateboard bearings. I advise you to sandpaper the rolls from both sides to make them a bit shorter so they are not…
uses 14 screws
After modifying the S4 with the stock files from Sunlu, i found that the cardboard rolls were biting into the holder. I decided to design up a holder for multiple polymaker spools. This is a drop in replacement from the original Sunlu 3kg…
I messed up and bought a 3kg spool of esun pla+ which was way too large for the included spool holder that came with my mk3s+ and I couldn't find any large spool holders that didn't need like 40 extra parts. All you need to build this is…
This is a filament holder I made for use with spools up to around 3 kilo. Designed to be used with 608 bearings.
It's assembled on 4х 608zz bearings. Includes two roller Long for 3kg and 1kg spools Short only for small 1kg spools If you want to make something much more complicated than necessary, there is an option "decorative". Everything is…
This is a remix of another PRUSA spool holder (see link below). This variation adds an additional screw at the bottom of the bracket to prevent the parts from splitting apart after they are screwed together. This spool holder is…
This is a bearing mounted spool holder for the Prusa XL. It is designed to fit up to 3Kg spools. This uses the original spool mounting screw and nut. Hardware Required: ¼-20 x 4 button head bolt, ¼-20 locking nut and 2x 608 bearings NOTE:…
One of the best mods for the landroid for me. Gives it great traction. Used this for 3 years now Basic housing. Use 3M tape to attach to Landroid Fusion file included if you wanted to make it more fancy or to your taste. Link to weight…
this threads in to the stock locations, it is a remix of @TheDibbler_613760's design i just made is way more dense.
Wanted to use Polymaker 3kg spools, so I modified it +5.2cm and added an extra arm for support that uses the top rear ARC acrylic mount and increased the pin length + increased pin diameter from 7.8 to 7.9mm to use the bearing for…
There a two types of roller, one with bearings and one without them but i think they are necessary considered the weight. BOM: n° 1 M8 threaded rod ( for a single "Section" use about 155 mm of rod) n° 8 washers for 1 section n° 4…
I have some larger rolls that do not roll well on the bar. I wanted to be able to handle the PTFE tube as well so I expanded the current setup. I have printed with or without the supports. You may have some issues with the screws if you…
Requires 4x 608 open bearings. 8x22x7, 2 on each side. A dab of glue to hold them in place on the center axle
You need: 8x Bearing 608z 2x Shaft 8 mm if you print 2 half part, you also need 4x screw M3*40 Sealant for joining the two halves and creating a gasket between the container and the bottom part You need to print: 1x DryBoxBodyMainFull or…
An optimized 2 parts version of the roller that can (way) better withstand the wieght of heavier spools
Print Setting: 3 Walls 15% Infill I printed it with PLA but it can be printed with PETG or ABS I used brim on spool holder both sides Don't need support Is printed in two parts Has a PTFE tube holder
Use with the SUNLU S4 Extension model But I suggust not to cut off the center support and try put the cover's pin out carfully the whole structure would much stable. Can use heat gun to heat up the pin conner (under 150°), would be much…
Deprecated. Use Instead: /model/527627 This is a stacking horizontal spool holder/roller, originally designed for PolyMaker's 3kg spools (120mm wide, 250mm OD, 55mm ID). The parts are broken up with the largest being the tray at 250mm…
Included both the 1kg (2.2lb) and 2.3kg (5lb) filament roll models that I use to wall mount almost all of my filament spool rolls. I've printed these in both PLA & PETG and would recommend PETG though it's just a personal preference due…
I liked the large spool holder. But it didn't satisfy me a bit. Therefore, some of its parts were redesigned.
Update 2024-02-15: I finally got my first 3kg spool of filament and wouldn't you know, it didn't fit on the original version of this holder (SMH). So, I extended the arm by 1cm, increasing the length and girth of the fattest part. The…
I designed a spool holder built specifically for the RepRapper 3KG Spools of filament. The is one of the first reeditions. Updated versions can be found at MisterITLLC.com.
3 Kg spool holder for smooth effortless unwinding. NO GLUE NO SCRUES Just printed and assembled. Bearings better printed with ASA, but PETG is also possible Bearings and main axe bold and nut recommended to print with 0,15mm layer height.…
Designed this spool holder to mount to the factory location and support 3kg spools. I made the walls thicker for the heavier spool + longer lever arm, and included a core that can be printed sideways and pressed into the holder for…
Creality Ender 3 S1 Pro/Plus Filament holder adapter 2-3kg bearings or use without bearings (cylinder name “tubus 2-3kg use without bearings” ) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck.…
When looking for a spool holder for a large spool, I've noticed this nice model. Although, its rollers were too scary to print - very tall and requiring lots of support. So I came up with the idea to use a plastic (PVC) pipe instead of…
Big fan of FxWoody's design, printed the original model in PETG-CF. Decided to remix because I don't use 3kg spools yet…? and wasn't a huge fan with taking the front support off every spool change. Designing a side mounted spool holder…
This spool holder made to fit @LEO_app's multiboard (https://www.printables.com/model/1217421-creality-k1-k1c-k1se-multiboard-panels-with-the-or) for k1c because the original one who came with the printer didnt fit. But also I had 3KG…
WTF The world's first 3kg spool suitable holder for Prusa Mini/Mini Plus. ----Updated083124---- 1kg&3kg shaft ware updated. Enjoy!! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: φ0.8mm x 0.3mm…
After experimenting myself with different spool holders, this one was my favorite. The only problem that I had, was that the stand wasn't very sturdy and always fell over when printing. That's why I've designed this very simple hanger,…
There a two types of roller, one with bearings and one without them but i think they are necessary considered the weight. EDIT: new body version with tighter holes for the lower rods BOM : n° 2 22x8x7 bearings n° 4 M8 washers n° 1 150mm…
I made this model, because recently I got a 3 kg spool of filament, and my printers spool holder would probably break, since it's really only made for 1 kg of filament. (Its also 100% 3d printed! no screw's or bearings needed, the only…
The holes on the bottom are duplicated for use with another remix with a plates with a distance between the holes of 125
I reworked this model to include the same headpiece as original author but made it larger to accommodate larger rolls.
Here I set out designing a strong spool holder for 3kg rolls of filament, simple build in the end with only 4 printed parts that go together very easily, only extra parts needed are some 8mm ball bearings and one 3mm stainless steel rod…
Printed with PLA+ at: Fluted end down 0.15mm layers 3 walls 15% Gyroid Infill Organic Supports
Universal stand capable of holding all sorts of spools, that features: Holding up to ⌀270+mm x 105mm wide 3kg spools Widely available 608 bearings for stable heavy spools rolling Aluminum pipe as roller for long life 8mm honeycomb…
A spoolholder for 2.3 kg filament
The PolyDryer XL’s stock handle/roller system is clever, but physics is a tough critic. A 3kg spool creates significant friction on a simple plastic tube, which can lead to underextrusion or unnecessary wear on your printer’s gears. This…
This was just a quick fix, that makes this better but does not fix the problem 100%. Check out my other model for the real fix! This is a very quick fix for the Sunlu E2 filament drier. Although it is advertised as being able to use 3Kg…
This is a 3kg or 1kg spool holder designed specifically for the Proslat PVC slatwall system and holds the filament sideways to provide a straight path into the rear Y-port on the Bambu Carbon X1 printer. Just 4 parts to print, the main…
A heavy-duty spoolholder for the Sovol SV08 which needs no additional hardware, just pop it onto the inside of the original spoolholder with one bearing attached as seen in the picture. Interlock the parts using the original Screw and…
Best to be printed with MK4 due to sizes. The rod can be placed in a lower hole so you can use it with smaller spools as well. The filament guide and the small screws are necessary only if the filament string jumps off the spool. STL's…
A wall mounted spoolholder for 1-3kg Spools I use this to mount 3kg spools behind my Bambu Lab CoreXY printers since their spoolholders are too small to hold bigger spools. Printed from PETG, similar or stronger material recommended.…
A sturdy and reliable 3kg filament spool holder with additional .step file, engineered to handle large-capacity spools with smooth and consistent feed. This model is easy to print, assemble, and customize, offering an ideal upgrade for…
This is a spool roller specifically designed to fit and not interfere with the print bed in a RatRig V-Core 4 enclosure while still holding a 3kg spool. This has been tested with the polymaker 3kg spools, and it fits perfectly. I would…
Core One 3kg Offset Twist Spool Holder – Remix This is an offset variant of my Core One twist spool holder remix , designed to support 3kg filament spools that do not clear the recessed side panel when using the standard 2kg mount. The…
A redesigned extension for the Sunlu S4 spool holder, optimized to accommodate 3kg spools . This version upgrades the original design by allowing the support bar to be mounted on bearings , providing smoother rotation and improved…
Recently bought some 3kg spools of filament. Therefore i needed a larger spool holder than what i had, so i made this. It snaps right on, the left side of the P1P. The 2 pictures from tinkercad shows the 2 steps (Screw holes are built in,…
Dieses Modell ist ein externer Filamenthalter mit Führung für den Creality K2, K2 Pro und K2 Plus, ideal für große und schwere 2,5–3 kg Filamentspulen. / This model is an external filament spool holder with guide for the Creality K2, K2…
rescale the roll size, round 35mm
A simple spool holder designed for 3kg spools, but 1kg spools and 2kg spools also work. To put triangles on bar- Put 1 triangle on par put spool on bar put 2nd triangle on bar
Sovol SV08 Max 3kg Spool Holder Bigger spool holder designed for the Sovol SV08 Max to comfortably fit 3kg filament spools (and large 2kg spools). The original holder on the SV08 Max is too short for bigger spools. This extension uses a…
![Stackable Horizontal Spool Holder for 1kg or 3kg Filament [V2]](https://media.printables.com/media/prints/527627/images/4290070_cb6640df-ca40-4912-b6b8-ee13e6ff264c/2023-07-19-224844.jpg)
![[Deprecated] Stackable Horizontal Spool Holder for 1kg or 3kg Filament [V1]](https://media.printables.com/media/prints/418149/images/3469358_e92082d3-d2b1-463b-ae22-3fd1580de5eb/spoolholder_twostacked.png)
