SunLu 1kg and 3kg Spool Gridfinity Carousel Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transform your old 1kg or 3kg SunLu spools into a gridfinity carousel.
- Rating
- 0 / 5
- Likes
- 226
- Downloads
- 323
- Makes
- 0
- Views
- 3,310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Based on Zack Freeman's gridfinity system.
Uses M3 x 8 screws for the 3kg spool design, Uses M2 x 6 screws for 1kg spool design. and gridfinity 6x2mm magnets if you choose to use magnets. Uses a 3/4inch or 20mm rod for the middle. Or you can print the provided rod design.
Printer specs: needs at least 180mm x 160mm x 100mm build volume. If you are printing the axel stick then you should have a 250mm build plate.
I have a bunch of SunLu spools lying and I wanted to use them for something. They use the older refillable spool design, I have not tested it with the newer spool design, so proceed with caution if you try to use the newer spool.
1kg spool design: Can fit 9 1x1 bases. Superglue the 1kg spacer in the middle to shrink the hole diameter. Uses M2 x 6 screws. Fits 4 spools on the 306mm stick. Use 1 washer on each end and 1 in between each spool.
3kg spool design: can fit 6 2x2 bases. Superglue the 3kg spacer in the middle to shrink the hole diameter. Uses m3 x 8 screws. Fits 2 spools on the 306mm stick. Use 1 washer on each end and 2 in between the spools.