10in Mini Rack Adapter for TP-Link TL-SG108S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
mini rack adapter (10 inch width) for tp-link 8 port switches for "Pndlsm's MiniRack" series.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 79
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches.
Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout
Should give a satisfying and loud click when inserting the switch into the adapter, the nubs will hold on to the switch really securely
Compatability
Known to be compatible with:
- TL-SG108S
- TL-SG108
Maybe compatible with (Stud width should be correct, but uncertain depth, take a measurement and send picture first to check):
DS106GPP
- DS106P
- DS108G
- DS108GP
- LS106LP
- TL-SF1006P
- TL-SG1005P-PD
- TL-SG1006PP
Print settings
I've had good results with:
- default PLA
- 0.2mm Quality settings.
- Enabled organic supports and painted the bottom part of the nubbings (see picture), you might be able to avoid this with a really well tuned printer temp profile
- After printing if theres stringing its relatively trivial to remove using a lighter
Print time should be around 7 hours on a Prusa Mk3s and use 43.5g of plastic
I made the original file relatively parametric and happy to make any modifications if you have a slightly different hole pattern, just send it over!