1 / 2
BCJ Linear Rail Carriage For Libra Extruder with Custom BTT Eddy Duo Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carriage for the Booty Call Jones Linear Rail Mod for the K1C only. Allows stock or libra extruder and BTT Eddy Duo.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 36
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently converted my K1C to a BootyCall Jones Linear Rail Gantry and found a few tweaks I wanted to make. I wanted:
- to use a libra/trigger extruder so I integrated the carriage trim into the design.
- to use a BTT Eddy Duo that allows me to still print the BCJ Carriage at a 45 degree angle. I designed my own Eddy mount that attaches to heat set inserts on the back of the carriage which also gives clearance for the new curved heatsink on the K1C.
- to remove the integrated PCB standoffs since they get hot and deform with the heat sets. With this design, you heat set into the main body, then use printed standoffs to give clearance to the PCB. The original screws still work.