VEX Robotics Swerve Wheel Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
VEX Robotics Swerve Wheel Bracket
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
File updated
The holes are offset from the center. This allows it to be used as a swivel wheel without the attached motor. With the holes, hence wheel, in the middle, the bracket won't rotate when the vehicle changes direction (think shopping cart wheel).
This is a swerve drive bracket for a VEX robotic project. It has a 60 tooth high strength gear attached to a bracket. The three holes are so a VEX 393 or V5 motor can be attached. The bottom hole is round so you don't have to use a bearing flat.
It goes below a base. A 32 tooth gear can go between two of these with a motor driving the idler gear (32T gear). A Vex 393 with a potentiometer or a V5 motor can control the rotation of the two swerve wheels.