Phanteks Evolv Shift XT - Bottom Air Boosters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air boosters that raise the case for improved temperature and airflow.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
I've been a fan of this pc case since its release but struggled with temperatures and airflow. I thought it would have been a no-brainer to include air boosters for the bottom half of the pc case aswell instead of just two alternatives on top.
Either way, I took matters into my own hands and created these as a project to learn how to 3D print on my own. Considering this is my first project in this area, I’d say I’m very happy with the result – even if it involved a lot of trial and error along the way.
The temperature and airflow in my case have improved significantly since I installed these air boosters. You can mount either 2x 140mm or 2x 120mm fans.
Customization available
If you’re into water cooling and need more space, you can adjust the height of the air boosters yourself.
The holes for the threaded inserts are "drilled" deeper than the inserts shown in the example, so if you don’t have the exact size depicted in the pictures, that’s no problem. You can, of course, adjust the depth yourself as well, but I don’t recommend changing the M3 size.
BOM
- 4x M3 Bolts
- 4x M3 Threaded inserts
- 4x Top Panel standoffs (2x included as spare-parts with pc case)