Garden hose holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.63 – €3.21 net (excluding VAT)
For file: Garden_Hose_Holder_0.6n_0.3mm_PETG_MK3S_2h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.92 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 2.17 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Garden hose wall holder to keep it neat and arranged
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 67
- Makes
- 1
- Views
- 214
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Garden hose holder
A garden hose wall holder, meant to be printed in pairs of 2. Needs to be printed in PETG or anything stronger, since garden hoses are quite heavy. There are 6 screw holes, each 6mm in diameter. For infill i recommend any number from 15% above for added strength.
Uploaded 2 profiles, one for .6 nozzle and one for .4 nozzle
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3S+
Rafts:
No
Supports:
No
layer height:
0.2-0.3
Infill:
15%
Filament: Recommended PETG