Box for CR2450
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small box for CR2450 batteris (10pcs)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I had to order some CR2450 batteries since I will need to replace them in IOT devices from TP-LINK.
As I already made box for CR2032, LR44 etc. I decided to apply same design to fit CR2450.
Again I used round magnes 5x2 mm. There is no need to glue them if you do not want to. It is enough to use force to press them in.
Printed in PLA (Jayo Black Matte).
Nozzle: 0.4N
Layer: 0.2
Perimeters: 3 (but 2 will be good enough as well)
You can find two lids. One with text and one without.
If you would like for example version for only 5 of them, let me know in the comments and I will do my best to deliver them ASAP 😊
If you would like some other boxes, feel free to visit links below:
https://www.printables.com/model/1255376-cr2032-lr44-button-cell-battery-box
https://www.printables.com/model/1256441-cr2032-battery-box-with-magnets