Box for CR2450
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small box for CR2450 batteris (10pcs)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to order some CR2450 batteries since I will need to replace them in IOT devices from TP-LINK.
As I already made box for CR2032, LR44 etc. I decided to apply same design to fit CR2450.
Again I used round magnes 5x2 mm. There is no need to glue them if you do not want to. It is enough to use force to press them in.
Printed in PLA (Jayo Black Matte).
Nozzle: 0.4N
Layer: 0.2
Perimeters: 3 (but 2 will be good enough as well)
You can find two lids. One with text and one without.
If you would like for example version for only 5 of them, let me know in the comments and I will do my best to deliver them ASAP 😊
If you would like some other boxes, feel free to visit links below:
https://www.printables.com/model/1255376-cr2032-lr44-button-cell-battery-box
https://www.printables.com/model/1256441-cr2032-battery-box-with-magnets