Happymodel 1S Charger Shell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two piece shell for the usb Li-Hv lipo charger that comes with the Happymodel Mobula6. It has holes for the charging…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Two piece shell for the usb Li-Hv lipo charger that comes with the Happymodel Mobula6. It has holes for the charging status lights (center for Li-Hv, end for normal Lipo batteries).
This model requires gluing on the chamfered edges and optionally recommends a dab of glue on the underside of the PCB.
You may need to clip the pins on the connectors if they protrude further than 1 mm from the bottom of the PCB.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Any PLA Silk Silver
Category: R/C Vehicles