BHR Hip Resurfacing Impant Model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of BHR Hip Resurfacing implant
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model I put together of my BHR hip implant.
I made this using the listed sizes from my, very expensive, itemized bill. Along with overlaying some X-rays and reference photos to get the proportions right.
I took a little liberty in making a flat spot on the top of the head to give it a good surface to print off of, and I make the cup go over center so it will retain the head.
I didn't model the irregular surface (used to increase glue/cementing area), but I've included the fuzzy skin settings I used.
Clearances might be a bit tight depending on the machine, maybe scale down the head slightly if it drags or you cannot get in installed. It helps to roll it in, starting with the protrusion touching the cup.