1 / 1
2is Lexus IS250 shift boot mod retainer frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A shift boot retainer mod. instead of using a 3is shift boot
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 40
- Makes
- 0
- Views
- 737
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
You can print this instead of using the 3is shifter. it allows you to use whatever shift boot cover you want. You will need a shifter retainer/collar to keep the shift boot from sliding down. You may need to adjust the size depending on how wide you cut your hole and make sure you round off your corners.. i had to adjust the file by 3% for a snug fit with the shift boot over it. PLA will hold for a while but will eventually warp. For long term use print in a filament for high heat
My printer settings:
- Filament: PLA / reprinted in PETG-RCF
- Infill: 50%
Printed on Elegoo Neptune 4 Plus