192 models
Lexus car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Install instructions and the original launch video here:
There is a Toyota floor mat clip out there, but that was way too big so I decided to create my own model, dimensions should be close to a stock one. I would print this one laying on its side with some tree support and 100% infill.
33mm x 36mm logo 68mm x 10mm word 6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
Car key/fob combinations are notorious for becoming brittle and failing. I scanned the fob internals and designed the case to use M3 SHCS and nuts. 0.2mm, PLA, Sovol SV01
Two simple stands for keeping Perplexus puzzles from rolling around. 110mm: Perplexus Go 165mm: Perplexus Rookie 175mm: Perplexus Original 200mm: Perplexus Epic I added felt pads to keep the ball from getting scratched, but this is not…
Lexus KeyFob model Best made in petg and a solid print so it will be strong and not break. Like my work ? Buy me a coffee ….. Thanks Click here
Toyota Lexus Screw Cover for Yaris, Auris, Corolla, Rav4 and other models I recommend black material, printed in 100% infill and support only under the long pin.
Perplexus is a 3-D ball-in-a-maze puzzle or labyrinth game enclosed in a transparent plastic sphere. By twisting and turning the sphere, players attempt to maneuver a small steel ball through an intricate maze composed of a number of…
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
Amateur model, not dimensionally accurate, just for display.
Attach 6.5 and 6.75 speakers to a 6x9 factory Toyota/Lexus mount. Category: Automotive
Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…
Same as the original, just reversed with the big hole towards the shifter.
This is a valve stem cap for a Lexus. I made these to give as a fun gift to my son-in-law. You may need to print these with a brim. Color break is a 14.3. The pre-sliced file is for five caps.
Ständer für Perplexus mit Durchmesser 163, mit 70 Punkten. In die vier Ecken habe ich jeweils selbstklebendes Filz als Schoner für die Kugel eingeklebt. Das Filz gibt es z.B. hier:…
Original model from Thingiverse from RayTruant , this model is remixed to fit my Iphone 15 Pro with Rugged case and better 3d printer friendly now , you can print without any supports.
hii, there are 3 size of the lexus logo fits to different types of bumpers: LEXUS v6_real_small : 150 107 LEXUS v6_real : 163 120 LEXUS v6_real_big : 175*127 the dimensions are detailed on pic i upload Category: Automotive
Engine Cover Retainer Clips for Lexus & Toyota, designed for the cover on my Lexus RX350.
Wife uses a 40oz Stanley cup that is very top heavy and moves around way too much in the car. The stock GX cupholder is an ellipse shape that relies on 3 spring loaded detents to keep drinks stable. Those detents work well for light…
After (my wife) dropped the key to the 2003 Lexus ES300 one too many times, the key/fob housing broke beyond repair. This is a replacement housing. It turns out that the shape of the main key and the spare key is different at the housing…
The Lexus IS-F Airbox Clip is prone to breaking. This model reinforces the tab with a 3D printed brace, and optionally you can replace your clip if you've lost it. The Brace installs over your existing clip with no modifications required…
toyota/ lexus plastic clip Original part number: 90467-07220 make sure to print both parts SIDEWAYS and with SUPPORTS or how it is shown in photo I used it for my yaris cross, but from my research it fits like every toyota/lexus 2000 up…
Lexus wheel caps are not only a practical protective element, but also a unique detail that emphasizes the individual ch
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
Just like the title says, this time its symmetrical
Voilà un logo Lexus à imprimer en 3d, pour décoration 7cm de large, facile à imprimer
Inspired by Turtleman's collection of Low-Poly vehicles. It uses the same wheel as his models (atleast his Porsche 911)
Perfectly fits blank switch ports on the 2nd gen Lexus RX, will likely fit other Lexus/Toyota models too (tested only on 07 Lexus R350). Fits into socket for Toyota/Lexus switch blank part number 5553948020 Made to suit USB extensions…
Lexus IS200 IS300 Cupholder. Fits in the original glove compartment, no gluing required
I recommend using the fuzzy skin feature to improve the grip.
Because I could not find a free model for an additional cup holder, and charge 20$ for 3D printed ones seemed weird, I decided to create my own. A standard European McDonald's cup fits just fine. Version 1.1 has hole for small light, and…
Just a simple Lexus F Logo. Similar to the F logo found on the Lexus ISF
driver's seat drive gear Toyota (LEXUS) JZX90, JZX100, JZX110, MARK-X Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 100% Filament: НИТ ABS Black Category: Other
Lexus Logo || Dimensions | Width: 72.1mm/ 2.84inch Length: 59.5mm / 2.34inch Total Height: 6mm / 0.24inch Hole Diameter: 6mm / 0.24inch NOTE:A keyholeless version is available.
Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.
I don't like how chunky most phone holders are (due to wanting to fit any/all phones), or how they mount to your air vent or windscreen, 2 things I kinda need unobstructed. I wanted it out of the way, but still reachable, and figured the…
Print flat on it's back, support inside of the card pocket. For the logo ‘cover’ I recommend printing the outward facing side down on the bed for the smoothest appearance.
Set of replacement pins and clips designed for the rear trunk door trim of the Lexus RX450h -2009-2015. These components are used to securely fasten the interior plastic panel (tailgate trim) in place. Optimized for ABS 3D printing, these…
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
Custom Lexus rim (wheel) cap with Lexus Logo on top. Can be printed in 2 colors. It has 4 tabs to lock into the rim. Print with supports, logo facing up.
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
There were a lot of adapters out there for different vehicles and speakers. I never found one that I could use. Mine is for a 2017 300h, but should be the same for the 350. I also cut it down so it would fit on my 254mmx254mm print bed. I…
This is an IMMOBILE vent insert. It is meant to replace all moving internals via friction fit. Printed in PA612 CF (probably overkill) but fits nice and snug. I suggest painting in your supports just along the louver edges. The client…
Save and easy to print. No support.
Support pour le perplexus 70 Perplexus 70 stand
If you have an old Lexus or Toyota with the three button keyfob you are probably well aware that these don’t last as long as the cars do and they probably look like this: In my redesign I took the opportunity to add some icons to improve…
A holder to keep your Perplexus Epic in place. May work for other sized Perplexus puzzles, but don't have any to test. It's sized to perfectly fit the Perplexus Epic. Shouldn't need any rafts or supports. 5-10% infill 0.15mm print…
The wireless charger on the new Lexus NX leaves A LOT to be desired. The charger has a well known and documented issue where it will not reliably charge most new phones, especially new iPhones with MagSafe. I was fed up with it, so I…
Print as imported (on its side) with supports and optional raft. I had some issues with the silk PLA I used in the pictures but this should work well for normal PLA/PLA+. The clip part is the strongest part of these, so the clips…
I created this as the old plastic rivet disintegrated when attempting to swap over to a manual brake pedal on my SC400. Obviously this should fit the SC300 and likely the MKIV Supra as well as many other 90s Toyota vehicles
The original design was well constructed, although it was purposed for the 04-06 model. For this version I revised some of the corners and made it so the cupholder frame sits almost flush with the inner frame of the automotive trim. It…
This is a two-piece design to replace the stock outer rings of a Perplexus Epic in the event it needs to be taken apart. 16 M3x8 screws are the only hardware required. The puzzle's maze plus the two clear hemispheres are required. To…
Lexus SC300 Keychain Also works with Toyota Soarer
Today’s design continues my ornament series with a new twist — literally! This double spiral ornament features a recessed inner spiral , giving it a sense of depth and perspective that plays beautifully with light and shadow ✨. Printed…
Lexus SN 300H Drive Mode Knob No supports just print
This model is designed for the 2010 IS250. May work for similar models. I recommend printing this in a heat resistive material such as PETG, otherwise it will likely deform after some time.
I needed a rear door speaker mounting bracket for the Lexus LS430, as the Mark Levinson sound system is dead and I did not want to bother fixing it. Decided to basically tear it out and replace it with all new sound system. For the rear…
printed with PLA 20% infill and worked perfect without scratches
Stand for perplexus with diameter ~210 mm, with 125 points. I glued self-adhesive felt into each of the four corners as a protector for the ball as proposed in the original post.
Beautiful and very easy to print. A unique Lexus key ring
Lexus IS200/300 floor mat hook
designed for a friend, pretty sure its for SC430 dashes, replaces the center vents with 3 gauges
Lexus lego & writing keychain that I made because I love cars
On many Lexus SUVs that have the air springs, this little tool makes it easy to quickly disconnect the air line above the air spring. I believe the Lexus air lines are 6mm or so, and this works perfect for that. You can scale up or down.…
A Lexus keychain designed to be long, sleek, and very visible. It has a wide loop so that it is easy to move around on the keychain itself and isn't longer than the key itself. Print at 100% infill for best strength. Enable ironing for…
This is a shrunken key fob shell for a 2015 Lexus RC 350 key. I think 2015~19 Lexus models share this key fob, though I can't guarantee perfect fitment. The volume is reduced by about 60%. A small amount of support is needed for two M3…
There is a common issue whereby the plastic nipple that attaches to the canister box (which controls the airbox secondary intake) breaks. Mine broke, so i had to find a way to reattach the silicone tube to the airbox. This is also a nice…
Remixed from DocDrill: https://www.thingiverse.com/thing:4241723/files The original did not have a solid file, so I made it from the mesh. (Included also in this post.) Made for use with USB-C Keystone Cable from Poyiccot…
This is a phone cradle that should fit a lot of Android phones with a USB-C connection located near the middle on the bottom. It replaces the triangular panel on the centre console and will allow you to run a USB cable into the storage…
This is a remix of the ibuynewstuff boot clip for the 2008-2013 ISF/IS250/IS350. Actually I redesigned the boot attachment base from the original, but took inspiration from the original boot clip design by adding the anchor style hook.…
I’ve wanted a Lexus key card for my 2005 GS 300 S19 for ages, but they’re basically impossible to find in Europe. So I made one myself. I used the internals from an aftermarket smart key I already had. After looking around online, I found…
Lexus LFA This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
Jeder, der einen Perplexus Labyrinth-Ball besitzt, kennt das Problem: Wohin damit, wenn man nicht gerade spielt? Die Kugel rollt vom Regal und hat nie einen festen, dekorativen Platz. Dieser elegante und minimalistische Ständer löst genau…
not up to scale or perfect…have fun lexus LS fan boys.
This model is one more dustbin, but i designed the lid opening mechanism so it is strong and can be printed without supports.
The vent blades in my 2005 LS430 were loose and not in sync. I measured the shattered pieces of the connectors that were broken and printed these. Depending on tolerances in your case you may need to adjust the size of the holes. I've…
Our Perplexus Rebel puzzle ball needed some repairs on the inside, so we had to break open the original ring. This model is a replacement ring, composed of two parts. No screws required, maybe some drops of glue.
I've designed this stand for my nephew. It fits a Perplexus 3D Labyrinth Ball with circa 190mm diameter. No supports needed.
Print in TPU only. Useful if your OEM plastic connector has broken. *v2 added - fixed the push tab to print better, straightened the connector so it doesn't bunch up one way, and thinned it slightly to better rotate on the cap.
You can print this instead of using the 3is shifter. it allows you to use whatever shift boot cover you want. You will need a shifter retainer/collar to keep the shift boot from sliding down. You may need to adjust the size depending on…
This is a replacement housing for some Lexus and Toyota 3 button key fobs. It loses the backup key and slims down the design as much as posable. This was made for a 2013 Lexus CT200h. I would assume this will fit many other fobs of that…
install with 10mm led strip print with rectilinear infill
An outline of the iconic XE10 series (Toyota Altezza AS200-AS300, Lexus IS200-IS300).
A blank switch for a Lexus is200 with holes to fit a toggle-switch. Probablky fits other toyota and lexus models too. Reverse engineered ibraud's model and tweaked it for a better fit, added hole for button.
Lexus headlamp dustcover FOR LEXUS LX300. LX450, LX470, LX570, LX600 (CHECK ONLY ON LX470) WITHOUT HOLES FOR WIRES Пылезащитная крышка для фар Lexus. БЕЗ ОТВЕРСТИЙ ПОД ПРОВОДА REMIXES ARE WELCOME!
Just a quick print in a pinch for those of us who didnt get a drain adapter (or lost it) and cant wait for online stores to ship. Print in whatever youd like. I used ASA to keep it around a while. Press a little the first time you thread…
Lexus CT200h fuse box cover - power outlet fuse V2a - suit for bigger piggy back fuse
I made this brachial plexus model specifically for mass 3D printing and distribution to med students. The overall shape takes inspiration from Netter's, but with extensive subtle design choices which make printing up to 10 at a time per…
This is my first 3D model so be gentle 🙃 This fits in the cassette of a Lexus ES350 5th Gen (2008-2012) and holds an iPhone 15 Pro with case. Due it where it sits it's very subtle and has less wire mess compared to sticking it to the air…
Wanted to swap out my subwoofer in my lexus. It was a pain to take out the rear seat and rear deck, but I did it. I didn't want to cut up my old sub to remove the metal mounting bracket, so I decided to print my own. I'm sorry I don't…
Ce model est pour un Samsung S20 il est possible de modifier la largeur du support.
This is plastic piece that covers Headlight washer on the left side of the Lexus 2016 F Sport. DO NOT PRINT IN PLA - it will melt, PETG or ASA is recommended. 3 perimeters, 50% infill for better fit.
This is a model I made of the hard to find cowl clip for the edge part of the windshield cowl on a Lexus ct200h. I used the OEM one that I had (which I proceeded to drop into the wheel fender and lose). I make no claims of accuracy or…
