1 / 3
Original Size CFM Phone 2 pro Mods-add Magnet — image 1
1 / 3

Original Size CFM Phone 2 pro Mods-add Magnet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cover (original size) with integrated magnets for addings externals.

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
79
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

 

This is a CAD work, it is not currently done due to a lack of time and materials. I do not have the CFM Phone 2 Pro

The first goal was to add an external case integrating a case for the CFM BUDS 2, an X4 16650 (or 14650) external battery, a 1/2-inch Maxeon3 photovoltaic panel, and two speakers on the front panel... Easily detachable.

In short, a back cover to support more charge and have fun with fewer limitations!

Using as many standard components as possible, cost-effectively, and easy to implement.

Yes, it's possible, but ugly, bulky, heavy, and technically, I don't yet have the necessary knowledge... On this subject, the forces and interference of magnets are a mystery that I'm trying to delve into.

Could a shield be possible?

The case opens up a lot of possibilities (limited by weight = magnet power) not mentioned above:

  • Lidar
  • Add a lens without threads or tight ribs with photo add-ons (flash, storage, mini Polaroid, etc.)
  • Programmable LED panel
  • Customized and easily replaceable back cover
  • Full body case
  • Car mount
  • Dual screen
  • External storage
  • Laser
  • Swiss army knife

And many other things!

It is possible via a USB-C ribbon to maintain a correct length (minimum +5mm) while allowing a connection with external additions.Communication via Bluetooth (without USB-C) limits the original length but does not allow for charging. See the possibilities with induction.

Magnets can be replaced with steel sheets. This could limit the height but without a guarantee of centering (awaiting tests).

In the folders, you will find the tests (drafts) and the shell in several versions:

AM-XX⚠Add-ons (brut)⚠
HC-01Aimants Apparents 
HC-02Aimants Cachés 
HC-03⚠Aimants plus puissants⚠
  • ⚠HC-03 should be used with caution. Either use -13mm magnets (leaves little space...) only in HC-01⚠

Or use +13mm and increase the thickness of the case (a bit contrary to my goal).

The arrows are customizable but not detachable (unless magnets are added! HC-0X-B)

 

Nomenclature
Neodynium MagnetsØ20x1mm8HC-XX
Neodynium Magnets Ø15x1mm4HC-XX
Neodynium Magnets ∅1x0.5mm8HC-XX-B Only
FilamentAsa or more

 

For printing... Quite a few choices, but I haven't gotten around to finding all of them yet.

PLA-PETG-ABS (Not enough tolerance space! Need to work on the file) will be sensitive to the intended use without post-processing! PLA (for testing adds it's ok) isn't a very viable option.

TPU designed!

⚠If using HC-02, stop on the insert layer with the roof. 

The margins are very tight, even if forced through. My current magnets have a diameter that would fit well, so I modeled it for them⚠

Coming soon:

 

  • External battery (6x16650) + storage expansion (with or without photovoltaic) AM-01.step
  • Stylus case to be integrated into future add-ons
  • Case for CFM Buds 2 (no CAD available 😭)

I'm participating in the NothingsPhonesXPrintables contest.

Feel free to use this base for add-ons!

Tags