Original Size CFM Phone 2 pro Mods-add Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover (original size) with integrated magnets for addings externals.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a CAD work, it is not currently done due to a lack of time and materials. I do not have the CFM Phone 2 Pro |
The first goal was to add an external case integrating a case for the CFM BUDS 2, an X4 16650 (or 14650) external battery, a 1/2-inch Maxeon3 photovoltaic panel, and two speakers on the front panel... Easily detachable.
In short, a back cover to support more charge and have fun with fewer limitations!
Using as many standard components as possible, cost-effectively, and easy to implement.
Yes, it's possible, but ugly, bulky, heavy, and technically, I don't yet have the necessary knowledge... On this subject, the forces and interference of magnets are a mystery that I'm trying to delve into.
Could a shield be possible?
The case opens up a lot of possibilities (limited by weight = magnet power) not mentioned above:
- Lidar
- Add a lens without threads or tight ribs with photo add-ons (flash, storage, mini Polaroid, etc.)
- Programmable LED panel
- Customized and easily replaceable back cover
- Full body case
- Car mount
- Dual screen
- External storage
- Laser
- Swiss army knife
And many other things!
It is possible via a USB-C ribbon to maintain a correct length (minimum +5mm) while allowing a connection with external additions.Communication via Bluetooth (without USB-C) limits the original length but does not allow for charging. See the possibilities with induction.
Magnets can be replaced with steel sheets. This could limit the height but without a guarantee of centering (awaiting tests).
In the folders, you will find the tests (drafts) and the shell in several versions:
| AM-XX | ⚠Add-ons (brut)⚠ |
| HC-01 | Aimants Apparents |
| HC-02 | Aimants Cachés |
| HC-03 | ⚠Aimants plus puissants⚠ |
- ⚠HC-03 should be used with caution. Either use -13mm magnets (leaves little space...) only in HC-01⚠
Or use +13mm and increase the thickness of the case (a bit contrary to my goal).
The arrows are customizable but not detachable (unless magnets are added! HC-0X-B)
| Nomenclature |
| Neodynium Magnets | Ø20x1mm | 8 | HC-XX |
| Neodynium Magnets | Ø15x1mm | 4 | HC-XX |
| Neodynium Magnets | ∅1x0.5mm | 8 | HC-XX-B Only |
| Filament | Asa or more | ||
For printing... Quite a few choices, but I haven't gotten around to finding all of them yet.
PLA-PETG-ABS (Not enough tolerance space! Need to work on the file) will be sensitive to the intended use without post-processing! PLA (for testing adds it's ok) isn't a very viable option.
TPU designed!
⚠If using HC-02, stop on the insert layer with the roof.
The margins are very tight, even if forced through. My current magnets have a diameter that would fit well, so I modeled it for them⚠
Coming soon:
- External battery (6x16650) + storage expansion (with or without photovoltaic) AM-01.step
- Stylus case to be integrated into future add-ons
- Case for CFM Buds 2 (no CAD available 😭)
I'm participating in the NothingsPhonesXPrintables contest.
Feel free to use this base for add-ons!