HSW CanaKit Raspberry Pi Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a basic model to attach the Rpi to the HSW
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I wanted something to mount my CanaKit Rpi5 on the HSW. I couldn't find a model that was going to do what I wanted with the CanaKit case still attached. So, I worked with @Jogner to put together this model. I've only tried it with the Rpi5, but I'm assuming it should also work with the Rpi4(b). I suspect that it should even be compatible with Rpi models with a full-sized HDMI cable.
It is a little loose in the holder. So, there's a lip to give it support at the bottom. I think it gives it some room for airflow. However, it wants to pull to towards the power and HDMI cables. I've found that giving those cables some slack and allowing a small amount of gravity pull from the keyboard/mouse cables seems to balance it out.
Print settings:
- 4 Perimeters
- 20% infill (I used Gyroid)