1 / 11
Original Prusa i3 MK3 ENCLOSURE -Ikea STUVA — image 1
1 / 11

Original Prusa i3 MK3 ENCLOSURE -Ikea STUVA

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Original Prusa i3 MK3 ENCLOSURE - made from stuva parts Ikea work in progress... from IKEA part list norwegian…

Rating
0 / 5
Likes
8
Downloads
16
Makes
0
Views
1,628
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

Original Prusa i3 MK3 ENCLOSURE - made from stuva parts Ikea

work in progress...

from IKEA

part list norwegian numbers 1 x STUVA frame Artikkelnummer: 301.573.772 x STUVA GRUNDLIG Shelf Artikkelnummer: 001.286.97 2 x SINDVIK Vitrinedør Artikkelnummer: 902.918.582 x BESTÅ Hengsel Artikkelnummer: 802.612.58 4 x STUVA GRUNDLIG Skuff Artikkelnummer: 701.286.892 x FÖLJA Skuffefront Artikkelnummer: 803.207.57

from the lumber yard

2 boards about 98mm wide and 12-18mm thick and 192cm long2 boards same whit and thiknes as abov but ca 62cm long(depends on thickness)

1 plywood 192 x ca 62, and 4-12mm i use cradle grade plywood as its relay cheep where i liv.

Note

The Stuva frame is not deep enough to fit the printer, so the frame needs to be extended / deepen by adding the plywood and bords above then the printer will fit nice as the cabinet now is 58,5cm deep.

Glue and brad nail the extra frame to the back of the Stuva frame, and add the plywood to the new extension.

Paint before adding plywood.

The cabinet is now about 95mm deeper, and the extra depth behind the drawers fine to mount power-cord and raspberry pi led driver and stuff.

Things to Print

  1. Camera case for the raspberry pi cam
  2. STUVA-raspberry-cam-ball-mount , infil: 70% support:no
  3. STUVA-spring-steel-sheet-holder.stl infil: 20% support:no (for mounting extra print sheet )

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Supports:

Doesn't Matter


Notes:

STUVA-raspberry-cam-ball-mount

Extra spring steel sheet ========================

Print 2 x of STUVA-spring-steel-sheet-holder.stl monte as on picture.

You also need to mount 2 x of 15x15mm magnets whit 4mm hole, as on picture.

Extra spring steel sheet in holder

Magnets, and knobs

Category: 3D Printing

Tags