Generic Solar Panel Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount for panels with an outer frame that provides an inner lip on the back-side of the panel.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 21
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a solar panel mount using the hinge from the Voltaic Solar Enclosure, paired with the bracket remix using the other side of the hinge found here: https://www.printables.com/model/1282752-leads-solar-panel-pole-bracket-merged-with-voltaic
I used Double-sided carpet tape for the surfaces contacting the panel underside, and only one screw is needed to secure the top of the frame to the mount.
Note! This print is 9mm thick. For your insert, print 1mm less than your measured panel thickness
For reference, the solar panel used is here: