Spool Clamps for Gluing Guitars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple design: 2 cone frustrum spools, an M5 threaded rod, 2 nuts and a knob.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 55
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
These clamps are generally used to glue accoustic guitar body tops and bottoms to the sides. You usually need about 24 pieces. Each piece consists of 3 3D printed parts: the 2 spools (cone frustrum shaped to save PLA) and a knob.
Additional hardware you need:
20cm long M5 threaded rod (or any lenght you want)
1x M5 nut
1x M5 nyloc nut (M5 nut with nylon insert)
A piece of anti-slip shelf liner
A piece of heatshrink.
CA glue
The STL parts are rotated correctly, just import them into the slicer and print without supports. I would use 30-50% infill.