1 / 10
Crash the Adventurous Articulated Action Figure — image 1
1 / 10

Crash the Adventurous Articulated Action Figure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Crash is a highly posable articulated action figure. It is designed for 95A-98A TPUs so It is durable and sturdy.

Rating
0 / 5
Likes
72
Downloads
394
Makes
0
Views
2,262
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

CRASH THE ADVENTUROUS ARTICULATED ACTION FIGURE

 

Crash is my first 3D model and I'm so happy to share it with you all. Since I was a little kid, I always wanted to design my own action figures and thanks to 3D printing I could make my dreams come true. 

 

Summary:

1- Crash is an articulated action figure

2- It is printed with 98A or 95A TPUs which makes the figure very sturdy and durable

3- I HIGHLY recommend you to dry your filaments before printing

4- Remixes are allowed (and greatly appreciated)

 

 

PRINTING:

Crash has 2 versions: 

  • 98A TPU 
  • 95A TPU- PETG

Important: Initially I designed the model to be printed with 98A TPUs and it works great! But it was too niche. So I experimented with more common, 95A TPUs and saw that just by simply printing the joint parts with PETG (and probably any other rigid filament) the figure works as good as the 98A version. Printing with only 95A TPUs makes the figure too gummy and joints usually stretch before bending so I suggest rigid filaments for joint parts (3mf files are included). (PETG parts are highlighted in the individual parts section)

 

 

1- All individual parts are uploaded

2- 3mf file for 98A includes 3 plates: All parts arranged to be printed in a single plate/ scaled up version(115%) /extra accessories

3- 3mf file for 95A includes 4 plates: All TPU parts arranged to be printed in a single plate/ joint parts in a separate build plate/ scaled up version(115%) / extra accessories

4- some parts needs to be printed 2 times. I included the doubles in the 3mf files but if you are using individual parts you should print files that has “x2” in the name, twice. 

5- All pieces are arranged in the best orientation (to the best of my abilities) but of course you can change it.  

6- 115% scaled up version is roughly around 6 inches and 15cm

LAYER HEIGHT12 mm
INFILL40%

7-Higher Infill density makes the figure more rigid. I find 40% is around the sweet spot but you are free to experiment. 

 

ASSEMBLY:

I am including an assembly sheet but if you have any questions feel free to ask in the comments

 

1- some parts might need a bit of force to put together( not much ) 

2- If you scale the figure up, assembly might need more force but it works good too. 

Tags