1 / 4
strap/tension belt mount for motorcycle crashbars / Spanngurthalter für Motorrad Sturzbügel — image 1
1 / 4

strap/tension belt mount for motorcycle crashbars / Spanngurthalter für Motorrad Sturzbügel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

mount for a strap/tension belt for 20,3mm (0.8 inch) tubes. Prevents straps/tension belts and bags from moving.

Rating
0 / 5
Likes
4
Downloads
17
Makes
0
Views
377
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

I secured my bags against movement with these tension belt mounts. Tested on a 3 week offroad morocco trip without any issues.

The outer diameter of the crashbar is 20,3 mm (0.8 inches).

The screws used are  M6x20  and a locknut.

I recommend printing it with PETG due to better strength and UV resistance over PLA.

 

The single one has one latch, the double version has two latches next to each other. It depends on if you want to attach the bag with one or two straps.

Use at your own risk.
This 3D model is provided "as is" without any warranties. The creator assumes no liability for any damages, injuries, or losses resulting from the printing, assembly, or use of this object.

Tags