1 / 1
Wardrobe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
This is an easy wardrobe out of 4 parts. Print the 2 uploaded parts. Then mirror them in Z and print again 2 parts. I printed in PLA, is good enough. You need 4 screws to fix it. the wood sticks have a diameter of 20mm for the upper part and 25 mm for the cloth hanger part. You get them cheap from any shop. I didn't screw the wood, just laid into the printed parts. My example has a lenght of 1 meter but you can just cut the wood in the lenght you need.