1 / 1
Wardrobe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an easy wardrobe out of 4 parts. Print the 2 uploaded parts. Then mirror them in Z and print again 2 parts. I printed in PLA, is good enough. You need 4 screws to fix it. the wood sticks have a diameter of 20mm for the upper part and 25 mm for the cloth hanger part. You get them cheap from any shop. I didn't screw the wood, just laid into the printed parts. My example has a lenght of 1 meter but you can just cut the wood in the lenght you need.