Parametric and modular desk organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Boxes of all sizes can be printed and assembled with a nuts and bolts that fit through the octogonal patten.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 149
- Makes
- 3
- Views
- 671
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This is a parametric design. I uploaded a set of sizes as a starting point but let me know if you need other sizes. In all 3 dimensions, the boxes can be sized in increments of 20mm.
I printed the boxes with a Marble PLA filament using a 0.6mm nozzle to resuce printing time. It should print fine with a 0.4mm nozzle as well. Just takes a bit more time. The nuts and bolts were tested both when printed with 0.4mm and 0.6mm nozzles.
Use 4 or 5 perimeters to print the bolts. When printed with only 2 perimeter they are easy to crack when tightening them.
No support needed.