1 / 11
Hole sifter fitment / Perforated sieve for herb and spice dispenser — image 1
1 / 11

Hole sifter fitment / Perforated sieve for herb and spice dispenser

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printed perforated sieve for herbs and spices that fits on a glass spice jar.

Rating
0 / 5
Likes
3
Downloads
9
Makes
0
Views
69
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
GNU General Public License v3.0

Use as a spare part or for other sieve sizes.

There are 2 different models, one for printing TPU 95A and one for printing PETG.

Size

Suitable for spice jar as shown in the screenshot of the sketch (outer diameter 31 mm).

  • 7 Holes, diameter 3 mm
  • 15 Holes, diameter 1.5 mm

Different Sizes

You can adjust the size in the FreeCAD model supplied.
If you need a model file for PETG printed in TPU, adapt the FreeCAD model to the external dimensions of TPU like in another TPU-model or vice versa.
 

Printing material

Print material TPU 95A (1.6 grams) or PETG (0.9 grams) - use the appropriate model.
 

Printing

It's recommended to print models with hole diameters smaller than 3 mm with Nozzle 0.2 mm and very low first layer speed ( ~ 7 mm/s).

Nozzle 0.2 mm, Layer height 0.10 mm, 4 wall loops, (at least) 3 bottom shell and top shell layers (no infill needed), no support, no brim.

Nozzle 0.4 mm, Layer height 0.2 mm, 2 or more walls, 2 bottom shell and top shell layers, no support, no brim.
Slowing down the print is recommended. It's not even a gram, so the printing time is practically irrelevant. Set the flow rate down to about 6 mm³/s (nozzle 0.4 mm, layer height 0.2 mm) and first layer speed ≤15 mm/s to obtain nice circles.

TPU sticks well on Bambu CoolPlate, PETG sticks very good on smooth HighTemp Plate / PEI Plate.

 

Updates

  • Update 15.06.2025: PETG-Sieve with 15 holes, hole diameter 1.5 mm added (Printing with Nozzle 0.2 mm!)
  • Update 30.05.2025: Model files, pictures and slicer model for PETG added. A different model was necessary to fit well on the spice jar.

 

-------------------------------
The only reward for a hobbyist is likes.

Support / Donation for my work

Tags