Offset Funnel: For Planters & Hard-to-Reach Fills
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple useful offset funnel
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this for my wife, who was having trouble using her garden hose to fill her planters with little float indicators. This lets her use a normal garden hose to get into those obnoxious little planter funnels without destroying the float indicators.
This offset funnel is designed to make watering raised planters with internal float indicators much easier by directing the stream of fill water around the little float indicator and avoiding the issue of all the water not going where you want it. It also works great for general purpose funneling where an offset funnel would help. I personally used to use different designs in lab in my PhD program, but they were invaluable in getting into tight spaces where normal funnels just wont do.
Its unique semi-circular spout keeps space open for air to escape or for floats to rise, while the offset design gives you better aim and reach where straight funnels fall short. Also handy for any application where a direct funnel won’t fit or would cause overflow.
Print in PLA or PETG for general use. Vase mode works with thicker nozzles, but the wall settings I have here are recommended for better prints in standard 0.4 mm nozzles durability. Should scale up/down fine. Recommend a default wall thickness so that you get a shell of ~1.5 mm thick.
STEP file included of funnel, so you can scale this as you please at max quality. BambuStudio/Slicer files for people who want pre-setup files.