Bahtinov Masks for Cameras, filter thread clip-in (77mm and 82mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These Bahtinov masks clip into filter threads of a lens (or a filter mounted to the lens) like a lens cap.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 196
- Makes
- 1
- Views
- 708
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bahtinov masks create diffraction patterns that can be used to quickly and precisely focus a lens. They are commonly used in astrophotography. The procedure is to put the Bahtinov mask in front of the lens, point the lens at a very small source of light (typically a star or planet) and then manually focus until the diffraction pattern is symmetrical. The Bahtinov mask is then removed and the pictures taken.
So far I've made a 77mm and 82mm masks – leave a comment if there is another size you'd like to see. The size of each mask is embossed on the front and back, but I think I was over-extruding a bit when I printed them so it's a bit hard for my old eye to make out.
They will work on any film or digital camera with appropriate size filter threads.
These Bahtinov masks make doing that it easy, because they clip on and off like a lens cap. There's no need for a special holder, they clip right into the filter threads of the appropriate size. They don[t have as secure a grip as a good lens cap, but they won't come off just because you shook the lens or pointed it down.
The 77mm mask is optimized for 200mm focal length and the 82mm mask is optimized for 70mm focal length, according to this Bahtinov Mask Generator. You don't have to have those exact focal lengths, so these filters work on my Nikon Z 24-70mm f2.8 (82mm) and my 100-400mm f4.5-5.6, 70-200mm f2.8, and 28-400 f4-8 (77mm) for example.
I printed these using 0.25mm nozzles, 0.12 layer height, 5 top and bottom layers, 3 perimeters, and 15% gyroid infill on my MK4S and my XL5T; they took between 70 and 95 minutes each.