Counting matching models…
VW Wheel Centre Cap 77mm Part number - 7L6 601 149 Replacement of the original part in case of loss, breakage or just like that :) Tested in heavy traffic :)) During printing, you can change the color layer by layer for a better effect ;)…
A extra slim lens/photography filter case with magnets (6x2mm). Fits 77mm, 67mm, 58mm, 52mm and 45mm Filters. 92mm x 87mm x 10mm Maximum filter thickness 7mm
About the design I recently bought an xTOOL S1 diode laser engraver/cutter. Once unpacked it was found that the exhaust port adapter that is supplied with the S1 is too large to connect to the xTOOL Fume extractor that I also purchased.…
Bahtinov masks create diffraction patterns that can be used to quickly and precisely focus a lens. They are commonly used in astrophotography. The procedure is to put the Bahtinov mask in front of the lens, point the lens at a very small…
Checklist Stencil Circle & Square
https://www.printables.com/model/247411-photo-thread-library-for-autodesk-fusion Used this for making the threads the f3d file is parametric so you can adjust the filter size and the height. The height parameter is used to change the…
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
58mm / 67mm / 77mm lens cap holder for Peak Design wide strap. Tested with modern Canon lens caps. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .12mm Infill: 100% Filament: Prusa Research…
Updates: Aug-10 2017: 2.0 update. Was not happy with uneven clamping. Increased clamping screws to 6, decrease mounting screws to 2. Tweaked front cap to maybe print better in ABS. Aug-9 2017: Added a notch to outside of rings and inside…
Mon lens cap holder mais en version 67mm et 77mm, les deux bouchons vont dessus, son epaisseure a changer et quelques petites modifications ont étés apportés. Print Settings Printer: Dioscovery 200 Rafts: No Supports: Yes Resolution: 0.2…
Transport Dose für Objektive Rundfilter mit 77mm Durchmesser. Platz bis zu 12 Filter. Dose ist mit Schraubverschluss. Zusätzlich kann auch am Deckel und Boden noch ein Schaumstoff geklebt werden.
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Hook for Skadis board Size: ~77mm Printed with PETG
Needed some shelf supports for a pre-drilled shelf. Nothing fancy, just learning 3D printing & design. There were some already out there, but I'm learning and wanted to build it myself.
A simple funnel designed specifically for refilling dry & dry silica gel containers. The mouth of the funnel is 77m, the spout is 24mm, and the funnel is 85mm tall. This license applies to this file: Creative Commons - Attribution -…
I created this filter adapter because I recently converted my old Canon G12 to view full spectrum light (using this tutorial: https://www.lifepixel.com/tutorials/infrared-diy-tutorials/canon-powershot-g12-ir ) I did not want to fully…
Disposable shower drain mesh
77mm 3D Printable Spool A simple 3D printable modular spool, Allowing the user to wrap up variable lengths of wire. The design can be reused hundreds of times. The inner diameter of the spool is 20mm, with the outer diameter being 77m.…
A deeper box for a 77mm filter. Hinge and clasp still works great!
Inspired in other models in printables I made from scratch a small and discrete magnetic fidget that is modeled for 3.18mm tall x 4.77mm diameter magnets. The magnets have a tight fit due to the different magnet positions, you can place…
My interpretation of a lens hood and 77mm filter adapter for the Canon Lens EF 50 1:1.8 II, complete with lens cap. The lens cap is optional, as the original cap will fit into the hood as well. Slicing make sure layer height is suitable…
My wife liked the MOLLE lens cap holder that I remixed from Thingiverse, but her LowePro Whistler doesn't have MOLLE attachment points. So, I designed one that will fit on the lower strap on the right shoulder strap of her bag. Her lenses…
AstroSolar filter & mask holder for camera thread 77mm
A wall mount to store the Mirka Ceros orbital sander with a diameter of 77mm Print instructions Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0,2 Infill: 15
I have designed a timer stand for any 77mm diameter dial timer. The timer that I use it with is this one the Fusion 360 file is attached for customization Print settings: 15% infill .16 mm layers No support needed
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hSylBgY3XrC My first attempt at remix/editing something new for myself last year. It is a mask lens cap for the Sigma 10-20mm with 77mm filter. It should…
Linhof lens board 77mm for barrel lens. Category: Camera
Bracket for the Teleprompter file from Katz Creates to accommodate a 77mm step up ring with a 4mm thickness.
This is a holder for your camera lens cap. It attaches to a camera strap and holds either a 52mm or 77mm lens cap. I also added a version for 52 and 72mm caps.
Box Note 77mm Checklist stencil Circle, Square 2 X USB and 2 X USB-C
My goal was to create an effect in the bokeh when shooting macros of bees or other insects. So I created this simple screw on filter for my camera. It works with all 77mm lenses. In the future I will add some more threading templates such…
Einfach zwei mal ausdrucken. Die Schale kann dann mit Klammern zusammengehalten werden. Simply print it out twice. The tray can then be held together with clips. Category: DIY
Print in TPU to make sure it stays a snug fit. Holds the filter well even when shaking the camera. P.S. Do not shake cameras.
Lens cap mount for 45mm wide Peak strap. The mount has a 10° chamfer to make the cap sit very firm. I shaked the holder hard with the 77mm cap mounted and it wouldn't come loose. UPDATE 08.05.2026 - Added an model with space for 82mm cap
Deckel für Hundefutterdose für gängige 200g und 400g Dosen. Durchmesser des Deckel 77,8 mm.
As the name suggests.. made it for my Rolleiflex 6008 that has bayonet 6 fixture. made for my 80mm f2.8 planar lens. Remixed from a lens cap and a 77mm filter thread which I downloaded ages ago and cant remember where I got it from. I…
I needed to have a specific set of sizes for the lenses I use with my Canon R7. This fills the bill for almost any lens I might use. It attaches to the camera strap. I used blender to make this.
print in .12mm height layer for the threading to work best use support
These are tube rings with Losmandy dovetail that I'm using on my 6" (150mm) Newtonian astrophotography rig. They fit ø177mm tubes from GSO often resold under many other brand names. Bill of Materials Item Description Quantity 1 M4x40 Hex…
This is a planter for a disposable seedling pot. Sometimes you don't really want to repot a flower—you can just put it in this one. I felt inconvenienced, so I made one. I tried to incorporate a slightly curved pattern into the design. It…
My desk has a hole with a diameter of 77mm, which I don't need. This plug closes the hole. Printed in PETG. No support and no brim needed.
This is a planter for a disposable seedling pot. Sometimes you don't really want to repot a flower—you can just put it in this one. I felt inconvenienced, so I made one. I tried to incorporate a slightly curved pattern into the design. It…
As the name suggests.. made it for my Rolleiflex 6008 that has bayonet 6 fixture. made for my 80mm f2.8 planar lens. Remixed from a lens cap and a 77mm filter thread which I downloaded ages ago and cant remember where I got it from. I…
Deckel für Hundefutterdose für gängige 200g und 400g Dosen. Durchmesser des Deckel 77,8 mm.
This design allows lens filters (CPL, VND, UV, ect.) to be protected while attached to a lens. Additionally, two of the caps can protect a lens filter in storage. Finally, the cap can also be used to protect a bare lens as long as it has…
I designed this so that I could replace the loud 77mm fans on my Dynatron CPU coolers with quieter 80mm fans. The original Dynatron fans mounted with four clips and posts through the screw holes for alignment. This adapter mounts to the…
My desk has a hole with a diameter of 77mm, which I don't need. This plug closes the hole. Printed in PETG. No support and no brim needed.
Print thread part at 0.16mm or lower. You can use variable layer height to achieve that and save time by printing the rest of the body at much thicker layer height. 2 or 3 or more walls are recommended, anything more than that is not…
Upgrade your mobile photography with this custom 3D-printed filter mount designed specifically for the iPhone 17 Pro Techwoven case. The mount securely attaches using eight integrated neodymium magnets and allows you to use any standard…
This is a 77mm lens cap (or lenscap, if you search it as one word you will get more results...) It is designed to be printed without supports. The springs are printed separately in order to try different versions easily. Spring number =…
After a long day of thrashin' and catching some serious air on the halfpipe, my extremely handsome, adventurous, ironically over-qualified and [not to mention] very well-paid co-worker has a bad habit of taking his skateboard and leaving…
This is a case that I designed in order to accomodate a circular polarizer 77mm photo filter. It has an interior height of 12mm and the filter fits snuggly, without any foam or cloth. The case has a simple locking machanism that keeps it…
Key for a square hole, lenght of sides is 5.77mm. It has a hole for attaching, some "fuzzy skin" for better handling (@3mf). f3d/step files attached, so you can adapt it. The 3mf-file has the settings-box I used for giving a part of the…
First of all, this is limited right now to one size range, as it was requested and not too difficult to resolve. I’m including the STEP file, but for the threads you’ll want to refer to this config file . Pitch of .75, which is most common.
Simple drink coaster with 77mm inside diameter, 1mm thick bottom, 4mm in overall height and 3mm thick rim. Meant to be as minimalistic as possible while keeping its function. Print Settings Printer: PrintBucket 500 (my prevyious DIY…
I made this model for my small plant pots. The model is to be printed without supports. I made two versions but I am also adding .step file so you can make more versions if you have the CAD skills or ask me to make more versions.
This is a print in place filter holder designed to make it easy to make filters using material like Baader Astro Solar film. It's designed to screw into 72mm lens mounts. It's not threaded with the idea that the first few uses will tap a…
Simple 52mm to 77mm filter adaptor , I use it on my 40mm canon Lens with 77mm cpl filter
I used: 0.4N, 0.2LH, Max Perimeters, 100%infill, Fuzzy Skin
My K&F Concept filters have 15 grooves on each side for better grip, So I made a lens wrench to take advantage of those groves for more grip since these filters seem to get stuck together a lot and I like stacking them. I anyone knows…
Da Fidlock keine Thermosflaschen hat, habe ich einen Fidlock Adapter gekauft in der Hoffnung, meine Thermosflasche daran befestigen zu können. Der beiliegende Gurt ist aber viel zu klein und wohl nur für die hauseigenen Flaschen gedacht.…
