1 / 4
Eyepice cap / Viewfinder cover for Nikon D7500 and similar (Outer dim. 25x16 mm) — image 1
1 / 4

Eyepice cap / Viewfinder cover for Nikon D7500 and similar (Outer dim. 25x16 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Light can shine through the viewfinder during long exposures. The viewfinder should therefore be covered with a cap.

Rating
0 / 5
Likes
1
Downloads
23
Makes
0
Views
104
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Nikon camera models such as the D800 have a built in curtain to close the viewfinder.
But not on the “cheaper” models. Normally this will not be any problem as long as you don't do long exposures like in astrophotography. If the dark pic looks like a flat pic …  :-/

Viewfinder Size

This model was created for a Nikon D7500, but it should fit on other models too.
This cap should fit if the outer dimensions on your nikon are 25 mm x 16(.3) mm.

Or adapt the provided FreeCAD model  to your needs.

Printing

Approximately 1.5 grams, print it aligned as shown in the screenshot or slicer file.

Nozzle 0.2 mm, I doubt if it works with nozzle 0.4 mm.
PETG is recommended, Layer height 0.1 mm, No support but Brim (4 mm in my case, depending on bed adhesion)!
4 Wall loops, so no infill is required. Top and bottom shell layers 5.
Slow down the first layer to 20 mm/s or even better 15 mm/s.


The eyepiece cap should snap in.

 

-------------------------------
The only reward for a hobbyist is likes.

Support / Donation for my work

Tags