1 / 4
Eyepice cap / Viewfinder cover for Nikon D7500 and similar (Outer dim. 25x16 mm) — zdjęcie 1
1 / 4

Eyepice cap / Viewfinder cover for Nikon D7500 and similar (Outer dim. 25x16 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Light can shine through the viewfinder during long exposures. The viewfinder should therefore be covered with a cap.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
GNU General Public License v3.0

Nikon camera models such as the D800 have a built in curtain to close the viewfinder.
But not on the “cheaper” models. Normally this will not be any problem as long as you don't do long exposures like in astrophotography. If the dark pic looks like a flat pic …  :-/

Viewfinder Size

This model was created for a Nikon D7500, but it should fit on other models too.
This cap should fit if the outer dimensions on your nikon are 25 mm x 16(.3) mm.

Or adapt the provided FreeCAD model  to your needs.

Printing

Approximately 1.5 grams, print it aligned as shown in the screenshot or slicer file.

Nozzle 0.2 mm, I doubt if it works with nozzle 0.4 mm.
PETG is recommended, Layer height 0.1 mm, No support but Brim (4 mm in my case, depending on bed adhesion)!
4 Wall loops, so no infill is required. Top and bottom shell layers 5.
Slow down the first layer to 20 mm/s or even better 15 mm/s.


The eyepiece cap should snap in.

 

-------------------------------
The only reward for a hobbyist is likes.

Support / Donation for my work

Tagi