1 / 5
Wardrobe shelf support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Screw-on model (black)
Dimensions: 12mm diameter, 7mm height
It's designed for 4x20mm screws. I suggest printing it in TPU (with 100% infill or max walls) – this way you can tighten the screw a bit more, which will squish the printed part a bit. That will make it wider than 12mm, lifting the shelf ~1-2mm, and this way you can make very small adjustments so your shelf doesn't wobble. The shelf will settle in a bit anyway because it's TPU, so it really shouldn't wobble if you place it correctly.
Pre-drilled hole model (white)
It's designed for 5mm holes. Modeled radius is 4.85mm. Depth is 10mm. Make sure you print it laying down for strength.