Tank feed-through
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a feed-through for your garden water tank.
- Rating
- 5 / 5
- Likes
- 111
- Downloads
- 350
- Makes
- 1
- Views
- 1,766
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a feed-through for your garden water tank. The feed-through requires a flat surface inside the tank. Make a 25 mm hole in the tank and fit an O-ring with an inner diameter of 25 mm on the feed-through. Push the feed-through through the hole and secure it with the nut. The feed-through is available in two variants: one with a quick connect coupling and one for a 1/2" hose with a hose clamp.
Printing and print settings
In the model files, the parts are orientated in the direction best suited for printing. Use PETG for printing with a layer height of 0.2mm or less and a nozzle width of 0.4mm. A wall thickness of, say, 4 lines and a filling of 25%.
You might need some support for the quick connect coupling.
