1 / 4
HSW Lighter holder - HSW Feuerzeughalter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
German: HSW Halterung für zwei handelsübliche Feuerzeuge. English: HSW holder for two standard lighters.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
German: (english below)
Diese HSW Halterung ist für zwei handelsübliche Feuerzeuge (z. B. BIC oder ähnliche Modelle) entwickelt.
Druckeinstellungen (gedruckt mit Bambu Lab X1C):
- Schichthöhe: 0,4 mm
- Infill: 20–30 %
- Material: PLA
- Support notwendig
- Druckzeit: ca. 40 Minuten (je nach Setup)
English:
This HSW holder is designed for two standard lighters (e.g., BIC or similar models).
Print settings (printed with Bambu Lab X1C):
- Layer height: 0.4 mm
- Infill: 20–30%
- Material: PLA
- Supports required
- Print time: approx. 40 minutes (depending on setup)
