1 / 4
HSW Lighter holder - HSW Feuerzeughalter — zdjęcie 1
1 / 4

HSW Lighter holder - HSW Feuerzeughalter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

German: HSW Halterung für zwei handelsübliche Feuerzeuge. English: HSW holder for two standard lighters.

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

German: (english below)

Diese HSW Halterung ist für zwei handelsübliche Feuerzeuge (z. B. BIC oder ähnliche Modelle) entwickelt.

Druckeinstellungen (gedruckt mit Bambu Lab X1C):
  • Schichthöhe: 0,4 mm
  • Infill: 20–30 %
  • Material: PLA
  • Support notwendig
  • Druckzeit: ca. 40 Minuten (je nach Setup)

English:

This HSW holder is designed for two standard lighters (e.g., BIC or similar models).

Print settings (printed with Bambu Lab X1C):
  • Layer height: 0.4 mm
  • Infill: 20–30%
  • Material: PLA
  • Supports required
  • Print time: approx. 40 minutes (depending on setup)

Tagi