1 / 9
Soldering fume extractor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fume extractor that works with a 120mm blower fan and filter! Reuse an old CPAP tube that you may have laying.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 52
- Makes
- 0
- Views
- 402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a fume extractor I could direct closer to my soldering, so I made one.
Doesn't need much parts, and barely any support needed (picture of necessary supports attached).
Parts list :
- 1 x (85mm by 85mm filter)
- 7 x (M3 heat inserts)
- 3 x (M3 x 12mm screws)
- 4 x (M3 x 10mm screws)
- 2 x (M4 x 20mm screws with nuts)
- 1 x (CPAP tube that you don't use anymore)
- 1 x (GDSTIME 120mm blower fan : https://www.amazon.ca/-/fr/dp/B0C1C2ZPB2)
No soldering required, but you will need a way to insert the heat inserts.
Instructions and how I placed the models to print them are in the pictures.
If you have any question, feel free to ask away.
Happy printing!