1 / 1
Technical Woman HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Kingroon White Transmission Distance: 5.8
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White for the rest.