EBB36 mount for mini stealthburner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mountplate for EBB36, can be attached to the pancake stepper
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Extension plate for the mini stealthburner, can be attached to the pancake stepper with two threaded bolts (27mm long) and one smooth bolt (30mm long). Now the printhead can be connected via CAN-bus. To secure the bus, it may be secured with zip-ties to the nose on the mountplate.
The hole pattern in the mountplate is only for saving weight. Probably we can make the distance bolts from ABS, but the weight saving will be marginal.
BTW, I had to glue in the heat inserts in the original model because the holes were slightly too big. But the extension board could be useful for other toolhead as well.
Printed in PETG with no supports, 0.25mm layer height.