1 / 3
Foamboard Mounting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
System for temporarily mounting photos to foamboard
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
Simply system for non permanent mounting of photos to 5mm thick foamboard. Take the guide, and using a cheap hole punch (mines from Harbour Freight) punch the desired holes into the corners of the board.
Punch 9/64th (3.5-4mm) holes. The outer two are used by the edge clips. These have a small allowance so you can adjust the photo to pull it taught. The inner one can be used for 3x2mm magnets; the post goes into the board and the photo is held in place by magnets on the front side.