1 / 2
Ochrana kabelu Prusa Mini X-axis motor cable protection — image 1
1 / 2

Ochrana kabelu Prusa Mini X-axis motor cable protection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Motor X cable support. It does not limit motor cooling.

Rating
0 / 5
Likes
10
Downloads
63
Makes
1
Views
643
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Podpora kabelu motoru osy X. Neobepíná motor a tak nebrání jeho ochlazování.

PETG

4 perimetry

7 plných vrstev dolních i horních / 7 full lower and upper layers 

bez podpor / no supports

Pravý dolní šroub M12 Z-carriage vyšroubujeme, nahradíme šroubem M20. Podložka slouží k roznesení tlaku. Pozor na délku šroubu, musí projít vloženou maticí a zároveň se neopřít o ložisko Z. Budete ještě potřebovat stahovací pásku, Hariboo medvídci nejsou potřeba.

Unscrew the lower right screw M12 Z-carriage, replace with screw M20. The washer is used to distribute the pressure. Pay attention to the length of the screw, it must pass through the inserted nut and not touch the bearing Z at the same time. You will still need a zip tie. Hariboo teddy bears are not needed.

Tags