1 / 2
Tradrack Feed Brake with pre-gate sensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinged brake to prevent filament slip, with pre-gate sensor
- Rating
- 1 / 5
- Likes
- 13
- Downloads
- 46
- Makes
- 1
- Views
- 597
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
GOAL
the goal was to make a private sensor that would work with auto-upload
PRINT SETTINGS
position the model as shown in the photo below, use layer 0.2 and support
Bill of Materials
- 2 x Magnet 6x3mm
- 1 x ECAS04 Mockup
- 1 x D2F-01F-T Microswitch
- 1 x 4mm ball bearing
- 1 x M3x8 Screw SHCS
- 1 x M5x10 Screw SHCS
- 1 x M5 Ball Spring T-Nut
INSTALLATION
Break off the small support from hinge
install 2 opposing 6x3 magnets, one in the hinge and one in the lane module and install Bearing.
DESIGN
many thanks to Vadim (https://www.printables.com/@vdl13_1975818) for the work done on the 3D model