Larger Spool Base and Door For Prusa Core One MMU3 Community Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the use of spools with an outer diameter up to 208mm, increased from the original maximum of 202mm
- Rating
- 4.75 / 5
- Likes
- 77
- Downloads
- 304
- Makes
- 2
- Views
- 3,337
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original models posted by @PrusaGuy are optimized to work with Prusament spools, however other spools are not guaranteed to be compatible.
My modified models allow PrintedSolid Jessie, Push Plastic, and Atomic spools to function in this spool holder solution. Although the door's negative volume diameter is smaller than that of the base spools with a larger diameter will still work well. The original mode's door is also smaller is maximum diameter than the base. The spool hangs off the conical feature in the center of the door when in the open state and tends to slide along the base when closed.