1 / 3
filament cutter arm for voron v0 - MG90 servo — image 1
1 / 3

filament cutter arm for voron v0 - MG90 servo

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

servo actuated arm to pull the lever and cut the filament - designed for the dragon burner

Rating
0 / 5
Likes
27
Downloads
82
Makes
1
Views
975
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

after putting together my dragon burner's filament cutter I realized i needed a way to actuate it, so I searched and found the design by jack miller, but it didn't really fit my needs, by I liked the idea, so I used it as a a base to create my design.

 


MY klipper config for using this: (yours will not be the same, this is only an example, please use your brain when copying)

[mcu rp2350]
serial: /dev/ttyACM0

[servo testservo]
pin: rp2350:gpio2
initial_angle: 0
maximum_servo_angle: 180
minimum_pulse_width: 0.000500
maximum_pulse_width: 0.002500

[gcode_macro testservo_OFF]
gcode:
   SET_SERVO SERVO=wipeServo WIDTH=0 # OFF

[gcode_macro FC_deploy]
gcode:
   SET_SERVO SERVO=testservo ANGLE=180
   G4 P500
   testservo_OFF
   
   
[gcode_macro FC_retract]
gcode:
   SET_SERVO SERVO=testservo ANGLE=0
   G4 P500
   testservo_OFF


[output_pin my_led]
pin: rp2350:gpio25
value:1

[gcode_macro FC_CUT]
description: Run custom toolhead motion with arm deployment
gcode:
   {% set x_pos = printer.toolhead.position.x %}
   {% set y_pos = printer.toolhead.position.y %}
   {% set homed_axes = printer.toolhead.homed_axes %}

   # Ensure the toolhead is homed
   
   {% if 'x' not in homed_axes or 'y' not in homed_axes %}
   G28 X
   G28 Y
   {% endif %}
   
   G90 ; absolute positioning
   
   # Move to start position if not already there
   {% if x_pos <= 30 or y_pos >= 90 %}
   G1 X31 Y89 F6000            ; Move to starting position (X > 30, Y < 90)
   {% endif %}

   # Deploy the arm
   FC_deploy

   # Begin movement sequence
   G1 X30
   G1 Y120
   G1 X10
   G1 Y100 F3600
   G1 Y90 F300
   G1 Y100 F300
   G1 Y110 F3600
   G1 X30
   G1 X60 Y60

   # Retract the arm
   FC_retract
 

Tags