Lilygo T-Echo Buttons (Shorter Reset Button)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement buttons for Lilygo T-Echo; optionally with a shorter reset button.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 46
- Makes
- 1
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I was frustrated with the very inviting position of the reset button, so I decided to replace it with a shorter one that is slightly recessed. While I was at it, I also modeled a 1:1 replacement for the original buttons.
The buttons print fine with supports, and still pretty nicely without. You won't see the difference once it is in the case anyway.
When replacing the original buttons, make sure you don't accidentally rip off the touch button's cable (it is soldered directly onto the pcb). The pcb's second screw is in the upper left corner beneath the tape, and you probably have to remove the antenna connector from the case to make a bit of room.