IKEA Lack Table Stack Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modded the leg connectors from the Prusa printer enclosure parts to stack an additional table on the bottom without…
- Rating
- 4.714 / 5
- Likes
- 46
- Downloads
- 365
- Makes
- 7
- Views
- 2,471
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I modded the leg connectors from the Prusa printer enclosure parts to stack an additional table on the bottom without walls. Makes a nice stable table stacking coupler for other purposes as well. I attach them with #10 x 3/4" wood screws and a little glue to keep them from rotating after they are attached. Works great.
Check out these other things for IKEA Lack table...
Table leg levelers: https://www.thingiverse.com/thing:3495732
Leg stiffeners: https://www.thingiverse.com/thing:3490946
Print instructions
Category: Decor Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .3
Infill: 20%
Filament: hatchbox pla black
Notes:
Easy to print and comes out great. Adjust the infill percentage to suit your needs. I used grid at a percentage I can't remember. Just be sure to use enough infill to support the top surface of the larger piece so that it prints smoothly.